Mijing 138°C Solder Paste Liquid Welding Paste
₨ 1
Low-Temperature Lead-Free Solder Paste
Mijing 138°C solder paste gives mobile repair technicians a lead-free, low-melt option for motherboard, circuit board and BGA chip work. The 138°C melting point lets you reflow joints at gentler hot air settings, which protects nearby components, flex connectors and pads. Mijing positions this paste for mobile phone motherboard, CPU, IC and SMD soldering, and it helps reduce false soldering on rework jobs. Pair it with a hot air station, a microscope and a PCB holder to build a controlled low-heat workflow on your repair bench. Mechanicpk supplies this low temperature solder paste for mobile repair shops and service centers across Pakistan.
Out of stock
Mijing 138°C Solder Paste for Low-Heat Motherboard Repair
Mijing 138°C solder paste gives you a lead-free, low-temperature joint for mobile motherboard, circuit board and BGA chip repair. Standard solder pastes need roughly 220°C or more to melt, while this paste liquefies at 138°C. You work with less heat on the board and keep stress away from the parts around the chip. Technicians who handle dead phone cases, hardware fault repairs and IC change karna jobs reach for low-melt paste when neighbouring components cannot take extra heat. Mechanicpk stocks this Mijing paste for Pakistani repair shops that want a dependable low-temperature option on the bench.
How the 138°C Melting Point Changes Your Workflow
Heat control decides whether a repair holds. A 138°C melting point lets the paste flow before the board, the shielding and the small passives reach their stress limits. You apply the paste to the cleaned pads, seat the chip and raise your hot air station in controlled steps with low airflow. You watch the paste turn bright and liquid, then stop heating once the joint forms. This sequence shortens the time the board spends under hot air and lowers the risk of lifted pads beside the target IC. A stable PCB holder keeps the board flat while the joint settles, so the chip stays aligned.
Where It Fits in BGA, CPU and IC Repair
Mijing lists this paste for mobile phone motherboard, electronic circuit board and BGA chip welding repair. On your bench that covers CPU and IC reattachment, SMD chip soldering and joint repair after a reballing job. The paste targets false soldering, the weak joint behind many dead phone and hang on logo complaints. A stable weld means fewer repeat opens and fewer returned phones. Check pad and ball alignment under a microscope before you apply heat. Use a reballing kit first when the chip needs fresh balls.
Why Technicians Choose Low-Temperature Paste
Low-melt paste suits boards where heat sensitivity limits your options. Charging port areas, display connectors and tightly packed logic sections all sit close to the chip you rework, and each one suffers under long, hot reflow. A 138°C paste lets you keep your hot air station setting lower and finish the joint faster. You also get a lead-free option that fits modern repair practice. Pair it with a soldering station for pad preparation and tinning, and your joint quality improves from the first pad to the last.
Application Tips for Cleaner Joints
Clean the pads and remove old solder before you apply fresh paste. Spread a thin, even layer, because thick paste raises the risk of bridges between fine-pitch pads. Close the container after every job so the paste stays workable for the next board. Keep your hot air nozzle moving, and let the board cool before you move it. These habits keep your rework consistent across every phone that comes through your workshop.
| Weight | 0.50 kg |
|---|
Key Features
- ✓138°C low melting point for gentler reflow
- ✓Lead-free formulation
- ✓Suited to mobile phone motherboard repair
- ✓Suited to BGA chip, CPU and IC soldering
- ✓Supports SMD chip and circuit board rework
- ✓Helps reduce false soldering
- ✓Fits alongside hot air station, microscope and PCB holder workflows
Specifications
| Brand | Mijing |
|---|---|
| Category | Solder Paste |
| Compatibility | Mobile phone motherboards, electronic circuit boards, BGA chips |
| Technology | Lead-free low-temperature soldering, 138°C melting point |
| Material | Lead-free tin solder paste |
Common Repair Uses
- ✓Low-temperature soldering and rework on mobile motherboards and circuit boards
- ✓BGA chip soldering and reattachment
- ✓CPU soldering on mobile motherboards
- ✓IC chip soldering and IC change karna jobs
- ✓SMD component soldering
- ✓Joint repair after reballing
- ✓Fixing false soldering and weak joints
- ✓Low-heat rework near heat-sensitive components
Compatible Devices
- ✓Devices: Universal — not device-specific; suitable for mobile phone motherboards, circuit boards and BGA-type chips
- ✓Mobile phone motherboards
- ✓Electronic circuit boards
- ✓BGA chips
- ✓CPU packages on mobile boards
- ✓IC chips
- ✓SMD chips
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
At what temperature does Mijing 138°C solder paste melt?
Is Mijing 138°C solder paste suitable for BGA chip repair on mobile motherboards?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



