YCS 55G Yellow Soldering Flux for Mobile Repair

₨ 550

Yellow Soldering Flux for Mobile Repair

YCS 55G Yellow Soldering Flux gives your bench a 55 g aluminum box of flux for board-level phone work. It helps solder wet pads, flow into joints, and bond cleanly when you reflow an IC, replace a connector, or tin a damaged trace. Supplier listings describe it as non-conductive, with strong fluidity and anti-oxidation behavior, so it suits crowded phone motherboards. Pair it with your soldering station, hot air station, and reballing kit for hardware fault repairs on dead phones, charging issue boards, and display problem boards. Mechanicpk supplies it to repair shops across Pakistan.

In stock

18 People watching this product now!
Description

Yellow Soldering Flux for Mobile Repair: YCS 55G in an Aluminum Box

YCS 55G Yellow Soldering Flux is a yellow soldering flux for mobile repair benches that handle board-level jobs every day. You get 55 g of flux in an aluminum box, so you can brush or dab it onto pads before each joint. Flux has one job at the joint: it lets solder wet the metal and flow cleanly instead of balling up. On a dead phone with a hardware fault, that wetting action decides whether a reflowed IC or a new connector holds or fails again. Mechanicpk supplies this flux to repair shops and service centers across Pakistan.

What the Supplier Listings Confirm

Supplier listings for the YCS yellow flux in the aluminum box give the pack size as 55 g. They describe a yellow flux with strong fluidity that cuts false soldering, and they credit it with anti-oxidation and non-conductive behavior. They also say it spreads heat evenly while you solder or desolder, and that you can use it on gold, copper, tin, and iron surfaces. Those traits match what a crowded phone board demands. Solder moves smoothly into the joint, pads stay free of oxide while they heat, and the flux does not create a conductive path between neighboring pads. The brand does not publish a solder alloy range, melting range, or residue class, so test on a scrap board whenever you change alloy or temperature profile.

Where It Fits in Your Repair Workflow

Reach for this flux at every stage where solder meets a bare pad. Pre-tin pads before you seat a replacement connector. Coat the board before you reflow a loose IC. Add a little before IC change karna, so the new part settles onto fresh solder. Use it when you tin a lifted trace or place a jumper lagana repair on a broken track. The supplier’s usage notes also cover layered boards: apply a small amount of flux to the lower motherboard layer, place the pre-tinned upper layer on top, and melt the solder at the joint with your iron.

Flux works as part of a bench setup, so match it with the tools around it. A temperature-controlled soldering station gives you steady heat for pad work, and a hot air station handles ICs and shields. A reballing kit rebuilds BGA balls, and a PCB holder keeps the board still while you flow solder. Keep a microscope and a multimeter close. Inspect the joint under magnification, then test continuity before you close the phone. Together these tools cover most boot loop issue, charging issue, and display problem jobs that trace back to a bad joint.

Using It at Your Bench

Start with a small amount. A thin layer on the pad does the work, and excess flux spatters under hot air and spreads onto nearby components. Set your station temperature for the solder alloy you use, not for the flux, since the listings do not state a working temperature. If you want a clean finish after the repair, wipe the area with isopropyl alcohol and a brush. Close the aluminum box after each use to keep dust and debris out of the flux.

Technicians who run a high volume of reflow and reballing jobs treat flux as a consumable they restock, not a one-off buy. Order it with solder paste, desoldering wick, and cleaning supplies so your bench never stops mid-repair. Mechanicpk stocks the surrounding range, from soldering stations and hot air stations to reballing kits and PCB holders, so you can build the full workflow from one supplier.

Additional information
Weight0.55 kg
Q & A
Please login to post questions

Key Features

  • 55 g of yellow flux in an aluminum box
  • Strong solder fluidity that reduces false soldering
  • Anti-oxidation behavior while pads heat
  • Non-conductive, so it does not bridge neighboring pads
  • Even heat spread during soldering and desoldering
  • Works on gold, copper, tin, and iron surfaces
  • Supports layered motherboard bonding
  • Fits routine PCB repair and rework at a phone repair bench

Specifications

BrandYCS
CategorySoldering Flux
CompatibilityUniversal, not device-specific
Supported DevicesAny phone or electronics board with solderable pads
Weight55 g

Common Repair Uses

  • Board-level soldering and rework on phone PCBs.
  • Pre-tinning pads before connector replacement
  • Reflowing loose ICs on dead phones
  • IC change karna with fresh solder on cleaned pads
  • Repairing lifted pads and broken traces with jumper lagana
  • BGA reballing preparation
  • Charging port and connector re-soldering
  • Bonding pre-tinned layers on stacked motherboards
  • Tinning pads and wires during general PCB repair

Compatible Devices

  • Universal, not device-specific. Use it on any phone board with solderable pads.
  • Samsung motherboards
  • Oppo and Realme motherboards
  • Vivo motherboards
  • Infinix, Tecno, and Itel motherboards
  • Xiaomi, Redmi, and Poco motherboards
  • iPhone logic boards
  • Huawei and Honor motherboards
  • Tablet and other electronics PCBs

FAQ

What is the product name?
The product name is YCS 55G Yellow Soldering Flux.
What is the brand of this product?
The brand of this product is YCS.
What is this product used for?
This product is used as a soldering flux for mobile repair. It helps solder wet pads and flow into joints during IC reflow, connector replacement, and PCB rework.
Which devices are compatible with this product?
This product is universal and not device-specific. You can use it on any phone or electronics board with solderable pads.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
How much flux does the box contain?
The aluminum box holds 55 g of yellow flux.
Does YCS yellow flux conduct electricity on a phone board?
Supplier listings describe it as non-conductive, so it does not create a conductive path between neighboring pads. Still, inspect fine-pitch areas under a microscope after soldering.
Which metals can I solder with YCS yellow flux?
Supplier listings name gold, copper, tin, and iron surfaces, which covers common phone board pads, shields, and connector terminals.