YCS Z04 Syringe Welding Oil Booster Rod (10cc)
₨ 800
Flux Syringe Booster for Mobile Repair
The YCS Z04 Syringe Welding Oil Booster Rod (10cc) gives your bench a controlled way to push flux oil, green oil, rosin and tin paste out of 5ml and 10cc syringes. The push rod delivers a stable, even discharge, so you place the right amount on BGA pads and IC footprints instead of squeezing a bare plunger by thumb. The oil slot holds the syringe firmly, and the durable body survives repeated use. The package includes three needles, and the compact 138 x 28 x 20 mm frame sits easily on a technician’s tool tray next to the hot air station.
In stock
YCS Z04 Flux Syringe Booster for Mobile Repair: Controlled Flux and Paste Delivery
The YCS Z04 Syringe Welding Oil Booster Rod (10cc) is a flux syringe booster for mobile repair that solves a small but constant bench problem: pushing viscous consumables out of a syringe with steady pressure. Thumb pressure on a bare plunger produces uneven beads, and uneven beads cause bridged pads, burnt flux and wasted paste. The YCS-Z04 body grips a 5ml or 10cc syringe and drives the plunger through a push rod, so each press moves the material forward smoothly. Mechanicpk stocks it for technicians who rework BGA chips, replace ICs and refill pads on mobile phone and electronic PCBs.
How the Push Rod Mechanism Handles Flux, Green Oil, Rosin and Tin Paste
The oil slot locks the syringe in place and resists loosening, so the barrel stays aligned while you work under the microscope. The push rod gives strong extrusion rebound feedback, which lets you feel the pressure you apply and keep the oil discharge balanced from the first press to the last. That control matters because each consumable behaves differently: flux oil flows freely, rosin sits thicker, and tin paste demands patient, even pressure. One booster covers all four, plus green oil, so you do not keep a separate pusher for every material on the bench. The three included needles let you set up different consumables and swap tips without hunting for spares. The body is durable and handles repeated use under normal conditions. You load the consumable, fit a needle, and press the push rod in short, deliberate strokes. Release pressure between pads so the bead stops cleanly instead of trailing across the board. Short strokes also keep flux off neighboring components, which saves you cleaning time before reflow.
Where the Booster Fits in Your Repair Workflow
Most chip-level jobs start with flux. When a dead phone needs an eMMC, CPU or power IC lifted, you clean the pads, apply flux, heat the chip with your hot air station and lift it. The booster puts a measured bead of flux or tin paste on those pads before you place the new IC or the reballed chip, which reduces bridging at fine pitch. It also helps with charging issue and display problem boards where you reflow a connector or an IC and need flux in one precise spot. Pair it with a reballing kit for BGA work, a PCB holder to keep the board steady, and a soldering station for touch-ups. Technicians who apply green oil over repaired tracks use the same booster to place it exactly where the track needs protection. Training institutes and busy service centers gain from it too: a fixed booster standardizes how every junior technician applies flux, so results stay consistent from bench to bench. Controlled pressure also stops the oversized blobs that dry out on a pad and need cleaning.
Specifications That Matter When You Buy
The model is YCS-Z04, and the body measures 138 x 28 x 20 mm, so it fits a standard repair bench tray. It supports 5ml and 10cc consumables, which covers the syringe sizes most mobile repair shops use for flux, rosin and paste. The package list shows one booster and three needles. The tool dispenses material and does not connect to any phone, so it works as a universal accessory across every brand and chipset you repair. Reuse matters for shop economics: one booster serves you through many syringes of flux and paste, and you replace needles only when a tip clogs or bends. If you build out a full BGA setup, add a microscope for inspection and a multimeter for checking the board after reflow. For a buyer comparing flux syringe boosters, the practical test is simple: does the syringe stay locked, does the discharge stay even, and does the body survive daily workshop use. The YCS Z04 targets exactly those three points.
| Weight | 0.15 kg |
|---|
Key Features
- ✓Push rod design delivers stable, uniform flux oil discharge
- ✓Oil slot holds the syringe firmly and resists loosening
- ✓Strong extrusion rebound feedback for controlled pressure
- ✓Works with 5ml and 10cc syringes
- ✓Pushes flux oil, green oil, rosin and tin paste
- ✓Smooth glue discharge for precise placement on BGA pads
- ✓Durable body built for repeated use under normal conditions
- ✓Includes 3 needles in the package
Specifications
| Brand Entity | YCS |
|---|---|
| Product Entity | YCS Z04 Syringe Welding Oil Booster Rod (10cc) |
| Technology Entity | Push rod syringe dispensing for flux oil, green oil, rosin and tin paste |
| Compatible Device Entities | Universal — mobile phone and electronic PCBs, BGA chip repair |
| Repair Process Entity | BGA chip repair, IC replacement and reballing flux application |
| Industry Entity | Mobile phone repair and PCB rework |
Common Repair Uses
- ✓Flux, oil and paste dispensing during mobile phone and electronic PCB BGA chip repair.
- ✓Applying flux on pads before IC replacement
- ✓Dispensing flux during BGA chip repair and reballing
- ✓Placing tin paste on pads with controlled pressure
- ✓Applying rosin for micro-soldering touch-ups
- ✓Dispensing green oil over repaired PCB tracks
- ✓Preparing boards for dead phone chip-level repair
- ✓Reflow work on charging issue and display problem boards
- ✓Bench use in repair shops, service centers and training institutes
Compatible Devices
- ✓Universal — not device-specific; the booster dispenses consumables and does not connect to a phone.
- ✓Any mobile phone board that needs flux, paste or oil applied during repair
- ✓Mobile phone PCBs under BGA chip repair
- ✓Electronic PCBs and circuit boards
- ✓5ml syringes
- ✓10cc syringes
- ✓Solder flux oil
- ✓Green oil
- ✓Rosin and tin paste
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which syringe sizes does the YCS Z04 booster support?
Can the YCS Z04 push tin paste and rosin as well as flux oil?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



