Relife RL-727 3D Extreme Pentalobe 0.8 Screwdriver
₨ 2,000
Relife RL-727 3D Screwdriver for Pentalobe and Precision Phone Work
The Relife RL-727 3D Extreme Edition screwdriver gives your repair bench three precision bits in one handle: a Y 0.6, a Phillips 1.5, and a 0.8 pentalobe star tip. The 3D tip geometry grips the screw head firmly, so you can back out stubborn fasteners without stripping them. A built-in magnetizing block magnetizes each bit automatically and permanently, which keeps small screws seated while you work. A precision silent bearing keeps the turning action smooth during long sessions. The anti-slip body keeps control steady when your hands are oily or sweaty.
Out of stock
Relife RL-727 3D Screwdriver Overview for Mobile Repair
The Relife RL-727 3D screwdriver gives you one handle for the screw heads you meet most often when opening phones. Its 3D Extreme Edition design pairs an aviation aluminum body with imported S2 steel bits, and each bit seats in the same grip. You switch profiles without losing control of the tool. Your disassembly time drops when the first bit fits the screw cleanly on the first turn. This tool does not replace a diagnostic station, but it removes the casing screws standing between a dead phone and the board you need to test.
Three Precision Bit Profiles in One Handle
The set includes a triangle Y 0.6 bit, a Phillips 1.5 bit, and a pentalobe 0.8 bit with a five-point star tip. Most technicians reach for the 0.8 pentalobe profile first, because it matches the fasteners used on the bottom of many iPhone models. The Y 0.6 tip handles triangle-head fasteners in phone housings and small electronics. The Phillips 1.5 bit covers cross-head screws inside casings and frames, so you can open a device without changing tools mid-job. Return each bit to its matching slot after every repair. That habit keeps the right profile in your hand when the next screw needs it, and it saves you from forcing the wrong tip into a head that will strip.
3D Extreme Edition Handle and Anti-Slip Grip
The handle uses high-hardness aviation aluminum with an anti-slip surface, so the body stays light and the grip stays secure. A precision silent bearing sits in the nut, which gives the turning action a smooth feel during long disassembly sessions. The 3D tip geometry seats into the screw head with less slip, and that reduces the risk of scratching the screw cap or rounding the recess. You keep steady pressure without pushing hard. Your wrist stays more relaxed when you work through a full bench of devices in one shift. A stable grip also helps when you handle tight frames where one slip can crack a flex cable or a display edge.
Magnetizing Block and Screw Retention
The built-in magnetizing block magnetizes the bit automatically and keeps that magnetism permanently, so you do not need a separate magnetizer on the bench. Small screws cling to the tip, which matters when you work over a crowded board or inside a narrow phone frame. Strong magnetic adsorption also stops screws from rolling off the bench mat and into a gap you cannot reach. Pair this with a labeled tray and sort screws in the order they came out. Reassembly then goes faster, and you avoid the guesswork of matching a short screw to a long one.
| Weight | 0.3 kg |
|---|
Key Features
- ✓3D Extreme Edition tip geometry for secure screw engagement
- ✓Three bit profiles: Y 0.6, Phillips 1.5, and pentalobe 0.8
- ✓Imported S2 steel bits
- ✓High-hardness aviation aluminum handle
- ✓Built-in magnetizing block with automatic, permanent magnetization
- ✓Precision silent bearing for smooth turning
- ✓Anti-slip grip body
- ✓Strong magnetic adsorption for screw retention
Specifications
| Brand | Relife |
|---|---|
| Model | RL-727 |
| Category | Screwdriver |
| Compatibility | Universal, not device-specific (match the bit to the screw head) |
| Supported Devices | Pentalobe 0.8, Y 0.6, and Phillips 1.5 fastener types used in mobile and electronics housings |
| Technology | 3D Extreme Edition tip geometry, built-in magnetizing block, precision silent bearing |
| Material | S2 steel bits, aviation aluminum handle |
Common Repair Uses
- ✓Removing bottom pentalobe screws before accessing a dead phone’s board
- ✓Opening phone housings that use Y 0.6 triangle-head fasteners
- ✓Removing Phillips 1.5 screws that hold internal frames and covers
- ✓Reassembling a phone with screws held on the magnetic tip
- ✓Removing display frame screws during screen replacement
- ✓Accessing the battery compartment during battery replacement
- ✓Opening a casing to reach the board before diagnostic or IC-level work
- ✓Disassembling electronic equipment for cleaning and inspection
Compatible Devices
- ✓Universal, scoped by screw type rather than device model
- ✓Pentalobe 0.8 five-point star fasteners, including iPhone bottom screws
- ✓Y 0.6 triangle-head fasteners in phone midframes and housings
- ✓Phillips 1.5 cross-head screws inside phone casings and frames
- ✓Mobile phone housings across Android and iPhone builds, matched by screw type
- ✓Small electronic device casings with matching screw heads
- ✓Telecommunications equipment housings that use the same fastener profiles
- ✓Watch and small electronics casings with 1.5 cross-head screws
- ✓Universal, not device-specific
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which screw types does the RL-727 cover?
Does the 0.8 pentalobe bit work on iPhone bottom screws?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



