Kailiwei TE-06 6-in-1 Metal Spudger Set
₨ 800
Kailiwei TE-06 Metal Spudger Set for Mobile Repair
The Kailiwei TE-06 is a 6-piece metal spudger set for technicians who open phones, tablets, and home appliances every day. Each metal piece gives you a rigid, thin pry edge for seams, clips, and tight housings, so you separate panels without bending your tool mid-job. A compact kit like this suits a repair bench, a service center toolbox, or a training lab setup. If your workflow starts with disassembly before IC, display, or charging-port work, this metal spudger set for mobile repair covers the opening stage with one set instead of scattered loose tools.
In stock
Kailiwei TE-06 Metal Spudger Set for Mobile Repair
The Kailiwei TE-06 is a 6-piece metal spudger set for repair benches that open devices all day. Each piece gives you a thin, rigid pry edge that slides into a seam, so this metal spudger set for mobile repair works as a dependable first tool before any board-level job starts. Kailiwei positions the kit for mobile phones, tablets, and home appliance housings, so one set covers most opening work in a Pakistani repair shop.
Why Metal Pry Tools Matter at the Disassembly Stage
Every repair starts with access. A dead phone, a display problem, or a charging issue all begin with separating a back panel, a frame, or a clipped housing. Plastic picks flex and snap under load on stubborn seams. A metal pry edge holds its shape, transfers your force precisely into the gap, and lets you work along a seam in short, controlled movements. You get more control on glued panels and tight snap-fit casings, and you spend less time fighting the housing before the actual repair begins.
Six Pieces, One Compact Kit
The TE-06 packs six metal pieces into one set, so you reach for a different pry piece as the opening job changes instead of forcing one tool through every gap. Metal construction also means the tips keep their thin edge across repeated jobs, which matters in a shop that opens dozens of devices a week. The set stays compact enough to sit beside your mat, inside a tool roll, or in a wooden storage box next to your screwdrivers and tweezers. You pick up a piece, make the pry, and move on without hunting through a drawer.
Where the TE-06 Fits in Your Repair Workflow
Place the TE-06 at the very start of the bench routine. You warm the adhesive with a Hot Air Station, slide a pry piece into the seam, release the clips, and lift the panel clear. Once the board is exposed, your next stage begins: a PCB Holder to fix the board, a Microscope for inspection, and a Reballing Kit when the fault points to a BGA chip. Clean disassembly protects the casing, flex connectors, and frame, so the phone goes back to the customer without new marks. For technicians who want to speed up adhesive softening, a hot air station is the natural upgrade-path tool to pair with this kit.
Handling Tips for Technicians
Metal gives you strength, so apply pressure gradually. Start at a corner or a natural gap, insert only the tip, and work along the seam instead of levering hard in one spot. Keep the edge away from flex cables, battery pouches, and display glass. Heat the adhesive first on glued back covers and frames so the pry piece slides in with light force. Switch to a plastic opener near fragile areas and use the metal piece where you need structural strength. With these habits, the TE-06 stays a precise opening tool across years of daily bench use.
| Weight | 0.3 kg |
|---|
Key Features
- ✓6-piece metal spudger set for mobile and appliance repair
- ✓Rigid metal pry edges that hold shape under load
- ✓Thin tips for seams, gaps, and clipped housings
- ✓Suitable for phones, tablets, and home appliances
- ✓Compact kit for benches, tool rolls, and storage boxes
- ✓Gives you a separate piece for each opening situation
- ✓Durable metal build for daily repair shop use
- ✓Fits technicians, service centers, and training institutes
Specifications
| Brand | Kailiwei |
|---|---|
| Model | TE-06 (6-piece set) |
| Category | Hardware Tools, Hand Tools |
| Compatibility | Mobile phones, tablets, home appliance housings |
| Material | Metal |
Common Repair Uses
- ✓Opening mobile phone back covers before battery or board work
- ✓Separating frames and housings at the start of a repair
- ✓Releasing internal clips and covers
- ✓Prying open tablets for charging or display service
- ✓Opening small home appliance housings
- ✓Lifting softened adhesive edges after heating
- ✓Preparing a dead phone for board-level inspection
- ✓Disassembly during repair training sessions
Compatible Devices
- ✓Universal opening tool — not device-specific; suited to devices with pry-accessible seams and clips
- ✓Mobile phone back panels and frames
- ✓Tablet housings
- ✓Smartphone display edge seams
- ✓Snap-fit plastic casings
- ✓Clipped internal covers
- ✓Small home appliance housings
- ✓Glued panels after adhesive softening
- ✓General electronics enclosures with accessible gaps
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is a metal spudger safe to use on a mobile phone back panel?
How many pieces does the Kailiwei TE-06 spudger set include?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



