Mechanic MR6 Max PCB Holder Biaxial Mainboard Fixture
₨ 4,700
MR6 Max Dual-Axis Board Fixture
The Mechanic MR6 Max PCB holder locks a phone mainboard in place on two axes, so hot air, iron work, and chip removal never shift the board under your hands. V-slot and trapezoidal slot clamps grip board edges closely, and multiple misalignment buckles give you different card positions for different board shapes. The adjustable clamping range covers a variety of logic board sizes, and the high-temperature resistant aluminum alloy body stays stable on a busy bench. Use it for CPU rework, IC chip soldering, and mobile motherboard repair with your hot air station, soldering station, and microscope.
In stock
Mechanic MR6 Max PCB Holder for Precision Board Work
The Mechanic MR6 Max PCB holder gives your repair bench a rigid, dual-axis platform for mainboard work. Mechanic builds it as a biaxial fixture: two adjustable clamping axes grip the board from opposing directions, so the board stays put while you apply hot air, work a soldering iron, or lift a chip with tweezers. If your day involves IC change karna, CPU rework, and charging IC replacement on dead phone boards, a board that creeps under airflow costs you time and lifted pads. The aluminum alloy body resists heat and gives the fixture enough stability to anchor a board on a crowded bench.
Clamp Geometry Built for Uneven Boards
The MR6 Max uses V-slot clamp structures and trapezoidal slot clamp structures on its dual-axis jaws. Both profiles hold the motherboard more closely and firmly than flat jaws, which matters when a board has stepped edges or components close to the rim. Multiple misalignment buckles add a range of card positions, so you match the clamp layout to the actual outline of the board in front of you instead of forcing the board to fit the tool.
The adjustable clamping range accepts various logic board sizes. That makes the fixture a universal holder rather than a device-specific jig: you set it by board dimensions, not by phone model. Check your most common boards against the clamping range before you commit the fixture to a daily workflow.
Where It Fits in Your Rework Workflow
Board holding sits at the start of nearly every chip-level job. Once the MR6 Max grips the board, you move through the same sequence on a stable surface: flux and preheat, hot air or iron work, chip lift, pad cleaning, and re-soldering. The fixture supports mobile phone motherboard repair, CPU rework, IC chip soldering, and hard disk board repair, as the supplier listings describe.
You get the most from the fixture when you pair it with the rest of your PCB repair setup. A hot air station and soldering station do the thermal work, a microscope lets you inspect pads after removal, a multimeter checks rails and continuity on the held board, and a reballing kit handles BGA chips that need new balls. The MR6 Max keeps the board steady through every step, so each tool performs against a fixed reference instead of a moving one. For hardware fault cases such as charging issue, hang on logo, or dead after water damage, that stability makes diagnosis and rework more repeatable.
What to Check Before You Buy
Measure the boards you service most often against the adjustable clamping range, because the fixture holds any board that fits its jaws and no board that exceeds them. Decide which clamp profile you plan to use for your usual board edges, the V-slot or the trapezoidal slot, and confirm the buckle positions cover your tightest layouts.
The package contains one fixture. If you run a multi-technician bench, buy one per workstation so each technician keeps a dedicated board holder next to their hot air station. If you want a lighter-duty option next to the MR6 Max, browse the PCB Holders category for related Mechanic fixtures, and check Reballing Kits and Microscopes to complete the workflow around the holder.
| Weight | 0.5 kg |
|---|
Key Features
- ✓Dual-axis (biaxial) clamping for stable board holding
- ✓V-slot clamp structure for closer, firmer grip
- ✓Trapezoidal slot clamp structure for stepped board edges
- ✓Multiple misalignment buckles with a variety of card positions
- ✓Adjustable clamping range for various logic board sizes
- ✓High-temperature resistant aluminum alloy body
- ✓Universal fit across board shapes within its range
- ✓Single-piece package for one bench station
Specifications
| Brand | Mechanic |
|---|---|
| Model | MR6 Max |
| Category | PCB Holder / Mainboard Repair Biaxial Fixture |
| Compatibility | Universal, set by board size within the adjustable clamping range |
| Supported Devices | Mobile phone motherboards, CPU boards, IC chip boards, hard disk boards |
| Technology | Dual-axis clamping with V-slot and trapezoidal slot clamp structures and misalignment buckles |
| Material | Aluminum Alloy |
Common Repair Uses
- ✓Board holding for chip-level rework and soldering on the bench
- ✓Mobile phone motherboard repair
- ✓CPU rework
- ✓IC chip soldering and desoldering
- ✓Hard disk board repair
- ✓Hot air chip removal on a clamped board
- ✓Pad cleaning and flux work under a microscope
- ✓Reballing positioning
- ✓Component replacement on irregular boards
Compatible Devices
- ✓Universal board holder, not device-specific; fits boards within its adjustable clamping range
- ✓Mobile phone motherboards of different shapes and sizes
- ✓Boards that need multiple card positions through misalignment buckles
- ✓Logic boards with stepped or irregular edges
- ✓CPU-level boards used in rework
- ✓Boards that need IC chip soldering
- ✓Hard disk PCBs
- ✓Small and medium electronics mainboards within the clamping range
- ✓Boards held for hot air work with other repair tools
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is the Mechanic MR6 Max device-specific or universal?
Can I use the MR6 Max with a hot air station for chip removal?
Related products
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



