Mijing FS-11 UV Curing Cooling Fan with Smoke Extraction
₨ 2,900
Mijing FS-11 3-in-1 Bench Fan
The Mijing FS-11 combines board cooling, solder smoke extraction, and UV adhesive curing in one compact 90 x 95 x 34 mm unit. Its honeycomb radiating structure and dual high-speed bearings move air across the board after hot air rework. The dual UV beads cure UV glue and solder mask on the same bench, with no second device needed. You control it with three speed levels, two timing gears, a one-button shutdown, and a four-level power display. The built-in wireless design keeps your bench free of extra cables. Mechanicpk supplies the FS-11 to Pakistani repair shops and technicians who want to cut tool switching during motherboard work.
Out of stock
Mijing FS-11 UV Curing Cooling Fan for Mobile Repair Benches
The Mijing FS-11 UV curing cooling fan for mobile repair puts three bench jobs into one unit: board cooling, solder smoke extraction, and UV adhesive curing. Mechanicpk supplies it to Pakistani repair shops that want fewer tools crowding the motherboard bench. After you finish a hot air rework, you cool the board, clear the smoke away from your face, and cure UV glue or solder mask without reaching for another device.
Honeycomb Airflow and Dual-Bearing Fan Design
The FS-11 uses a honeycomb radiating structure that spreads airflow across the board instead of blasting a single spot. Dual high-speed bearings drive the fan, which keeps rotation smooth during long sessions. The housing uses an anti-static environmental protection material, a sensible choice when you work close to bare PCBs and sensitive ICs. The manufacturer markets a 3S cooling function for fast heat drop after soldering, so you can handle a board sooner after an IC change karna job. Three speed levels let you match airflow to the task. A low setting suits fine work around small components, and a high setting clears heavy smoke from a busy session.
UV Curing and Bench Controls
Two UV beads sit on the FS-11 for curing UV glue, UV ink, and solder mask directly at the repair point. You cure in place and skip the trip to a separate lamp. Control stays simple: one button shuts the unit down, two timing gears cap how long it runs, and a four-level display shows the remaining power. The unit runs wirelessly, so you position it beside the board without a cable crossing your workspace. At 90 x 95 x 34 mm, it fits on a crowded bench next to your soldering station, PCB holder, and microscope.
Where It Fits in Your Repair Workflow
Place the FS-11 in the stage that follows hot air work. You lift an IC with your hot air station, reball or clean the pads with your reballing kit, solder the replacement, and then cool the board with this fan. Smoke extraction runs during soldering and reflow, so flux fumes move away from your breathing zone. When you repair a dead phone with a charging issue or a display problem, you often rebuild jumper tracks and cover them with solder mask. The UV beads cure that mask on the spot. The same unit also cures UV glue on camera modules, flex connectors, and screen assemblies.
You also use it in routine diagnostic work. Cool a board before you probe it with your multimeter, and you avoid reading values off a warm, shifting component. Technicians who run several boards a day gain the most, because each small saving in cooling and curing time repeats across the whole day.
The FS-11 works as a universal bench accessory, so it does not depend on a specific phone model or chipset. It suits Android and iPhone board repair, tablet boards, and small PCB work. You do not need to match it to a device, and that makes it an easy addition to any workshop. Pair it with an ISP pinout tool, an eMMC programmer, or a test box, and your hardware and software tasks share one organized bench.
Buy the Mijing FS-11 from Mechanicpk if you want one compact unit that handles cooling, smoke extraction, and UV curing together. Shops across Pakistan add it to their benches to shorten repair time and keep the air cleaner.
| Weight | 0.10 kg |
|---|
Key Features
- ✓Three-in-one design: cooling, smoke extraction, and UV curing
- ✓Honeycomb radiating airflow structure
- ✓Dual high-speed bearings for smooth fan rotation
- ✓Dual UV beads for glue, ink, and solder mask curing
- ✓Three-speed fan adjustment
- ✓Two-gear timing with one-button shutdown
- ✓Four-level power display
- ✓Wireless, compact design at 90 x 95 x 34 mm
Specifications
| Brand | Mijing |
|---|---|
| Model | FS-11 |
| Category | Cooling Fans and Smoke Fans, Mobile Repair Tools |
| Compatibility | Universal bench accessory, not device-specific |
| Technology | Honeycomb radiating airflow, dual high-speed bearings, dual UV beads, three-speed control, two-gear timing, four-level power display |
| Material | Anti-static environmental protection material |
| Dimensions | 90 x 95 x 34 mm |
Common Repair Uses
- ✓Cooling, smoke removal, and UV curing at the motherboard bench
- ✓Cooling a board after hot air IC removal or replacement
- ✓Extracting flux smoke during soldering
- ✓Curing UV solder mask on repaired tracks
- ✓Curing UV glue on screens and lenses
- ✓Curing UV ink on repaired jumper points
- ✓Cooling a board before measuring with a multimeter
- ✓Reflow and reballing work cooldown
- ✓Charging issue and dead phone board repair
Compatible Devices
- ✓Universal — works at the bench with any board, not tied to a single phone model or chipset
- ✓Android smartphone motherboards (all brands)
- ✓iPhone logic boards
- ✓Tablet motherboards
- ✓Camera module assemblies
- ✓Display and touch screen assemblies bonded with UV glue
- ✓Charging port and flex connector areas
- ✓Small PCB and electronics repair boards
- ✓Boards reworked with hot air stations and soldering stations
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What speed and timer settings does the Mijing FS-11 offer?
Can the Mijing FS-11 run without a power cable on the repair bench?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



