Mijing HM-11 Nano Cleaning Sponge 500pcs
₨ 1
Mijing HM-11 Nano Cleaning Sponge
The Mijing HM-11 is a nano cleaning sponge for mobile repair in Pakistan. Each box holds about 500 pre-cut cubes of high-density nano sponge, ready for your bench. Use them to lift flux, grease, dust and grime off motherboards, CPU and BGA chip areas, frames, back glass, LCD screens and camera lens modules. The sponge adsorbs dirt strongly, leaves no flocs or residue, and does not scratch. Pick up a cube with tweezers, add alcohol or flux remover if the job needs it, and wipe tight corners without dragging fibres across solder joints. Every box saves you from loose cotton threads on a freshly reballed board.
Out of stock
Nano Cleaning Sponge for Mobile Repair Pakistan: Mijing HM-11
Cotton swabs leave fibres on a clean board, and a lint-free finish matters when you hand a repaired phone back. The Mijing HM-11 is a nano cleaning sponge for mobile repair in Pakistan, built for technicians who clean motherboards, chips and screens every day. Each box holds about 500 pre-cut nano sponge cubes in a compact box, so you never trim material at the bench. You pick up one cube with tweezers, clean the area, and discard it. Mechanicpk stocks the HM-11 for shops that need a steady supply of residue-free cleaning material.
How the Nano Sponge Structure Works
Manufacturer descriptions cite a high-density nano sponge with a porous capillary structure that pulls surface stains into the material. That structure gives the HM-11 stronger adsorption than a cotton swab, so one pass lifts more flux, oil and dust. The sponge leaves no flocs and no residue, which keeps component edges and pad gaps clear. Because the material is soft and non-scratch, it handles delicate surfaces such as camera lens modules and screens without marking them. You can use the sponge dry for dust or pair it with alcohol or flux remover for stubborn deposits.
Where It Fits in the PCB Cleaning Workflow
After a hot air station and soldering station finish a chip job, flux paste and burnt residue stay behind around the pads. This is where the HM-11 earns its place. Clean the area before you inspect it under a microscope, so you see the true state of the solder joints. Clean again after reballing, before you refit the board in the phone. The same cubes also clean silicone grease and solder dust from control boards and power supplies, which suits workshops that repair more than phone boards.
Why Technicians Keep a Box on the Bench
Pre-cut cubes keep your workflow fast, since you never cut sponge by hand. A 500-piece box covers many cleaning jobs before you reorder. The compact box stores easily beside your flux and tweezers. Use it before a screen refit or camera module install to remove dust that would show under the glass. Pair it with your tweezers, flux and microscope to keep one consistent, clean finish across every repair.
| Weight | 0.2 kg |
|---|
Key Features
- ✓High-density nano sponge with strong adsorption
- ✓No flocs and no residue
- ✓Non-scratch, gentle on delicate surfaces
- ✓About 500 pre-cut cubes per box
- ✓Works dry or with alcohol and flux remover
- ✓Reaches tight corners when held with tweezers
- ✓Compact 107 x 105 x 53mm box
- ✓Lightweight 50g pack
Specifications
| Brand | MIJING |
|---|---|
| Model | HM-11 |
| Category | Repair Tools – Cleaning Tools |
| Compatibility | Mobile phone motherboards, CPU and BGA chips, back glass, LCD screens, frames, camera lens modules |
| Material | High-density nano sponge |
| Dimensions | 107mm x 105mm x 53mm (box) |
| Weight | 50g |
| Quantity | About 500 pre-cut pieces per box |
Common Repair Uses
- ✓Cleaning flux, grease, dust and grime during mobile phone and PCB repair.
- ✓Removing flux residue after IC change or reballing
- ✓Cleaning CPU and BGA chip areas before inspection
- ✓Wiping dust from camera lens modules
- ✓Cleaning LCD screens before refit
- ✓Removing grease from phone frames
- ✓Cleaning back glass before reassembly
- ✓Lifting dust and silicone grease from control boards
- ✓Cleaning tight corners around solder joints with tweezers
Compatible Devices
- ✓Universal – not device-specific. Cleans surfaces and boards on any phone brand, including iPhone and Android devices.
- ✓iPhone back glass, screen, frame and camera module
- ✓Android motherboards from Samsung, Oppo, Vivo, Infinix and Tecno
- ✓CPU and BGA chip areas on mobile PCBs
- ✓LCD and display screens
- ✓Camera lens modules
- ✓Phone frames and housings
- ✓Control boards and power supplies
- ✓Boards after reballing or IC change
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can I use the HM-11 nano sponge with alcohol or flux remover?
Does the HM-11 nano sponge leave fibres or scratch the board?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



