2UUL Hand Finish SEXY Blades 16-Pack (No Handle)

₨ 5,500

Hand Finish SEXY Blades for CPU and Underfill Work

The 2UUL hand finish SEXY blades pack gives your bench 16 hand-polished blades for board-level phone repair. You separate CPU and NAND flash chips, clear black underfill glue, and clean chip-edge residue without gouging the PCB. The pack ships without a handle, so you load the blades into the holder you already use. Hand finishing produces a smooth, sharp edge that you can regrind when it dulls. Mechanicpk stocks this pack for technicians in Pakistan who run daily IC change karna and reballing jobs and want spare edges ready on the bench.

In stock

12 People watching this product now!
Description

2UUL Hand Finish SEXY Blades for Precision Underfill Removal

The 2UUL hand finish SEXY blades set puts a full stock of hand-polished prying and scraping edges on your repair bench. This 16-blade pack ships without a handle, so you pair the blades with your own holder and keep a fresh edge ready for every job. The SEXY series follows four profile designs, Model S, E, X and Y, and each profile targets one stage of CPU, NAND and underfill removal on a mobile phone motherboard. A technician who runs several chip jobs a day wears edges down fast, and a multi-blade pack keeps the workflow moving without constant resharpening.

Blade Profiles and What Each One Cuts

Each profile in the SEXY series covers a distinct task. Model S separates the CPU from the NAND flash chip after you soften the underfill with heat. Model E removes glue around IC and CPU sites on the motherboard. Model X works along chip edges and clears edge glue in tight gaps. Model Y cuts the black underfill glue without harming the board. With 16 blades in the pack, you can reserve your sharpest edges for delicate passes near pads and keep worn ones for rougher scraping.

Hand Finishing and Edge Behavior

Hand polishing gives each blade a smooth, sharp edge, and the same process makes repeated regrinding easier. That matters on a live PCB. A rough edge catches solder mask and lifts pads, while a clean edge cuts underfill with light pressure and leaves the copper intact. When an edge dulls, you regrind it and return it to rotation instead of buying a new tool. Spare blades also let you swap mid-job and avoid forcing a tired edge across a fragile board.

Where This Pack Fits in Your Repair Workflow

You reach for these blades after the hot air station softens the glue and before reballing begins. A typical dead phone or hang on logo case with a suspect NAND or CPU follows a clear sequence. You heat the chip with your Hot Air Station, separate it with an S-profile edge, and clean the pads with E and Y edges. Then you reball with your Reballing Kit and seat the board in a PCB Holder under a Microscope. A Soldering Station finishes the pad touch-up. Technicians chasing a dead after flash fault on an eMMC or NAND board use the same sequence to swap the chip cleanly.

Why a 16-Blade Pack Suits Busy Workshops

Repair shops and service centers in Lahore, Karachi and Islamabad handle chip-off work in volume, and edge supply sets your pace. Sixteen blades let you assign profiles to different benches, keep a sharp reserve, and rotate worn edges to a grinding session at the end of the day. Because the pack carries no handle, you control the holder, the grip and the balance you prefer for long sessions under the microscope.

Additional information
Weight0.6 kg
Q & A
Please login to post questions

Key Features

  • 16 hand-finished blades in one pack
  • Hand-polished edges with a smooth, sharp finish
  • Edges stay easy to regrind and reuse
  • Supplied without a handle, so you choose your own holder
  • SEXY-series profile designs for CPU, IC and edge-glue tasks
  • Model S profile separates CPU and NAND flash
  • Model Y profile cuts black underfill without harming the board
  • Universal use across phone PCBs

Specifications

Brand2UUL
CategoryMobile Repair Tools – Blades and Glue Removal
CompatibilityUniversal – not phone-model-specific
Supported DevicesMobile phone motherboards with underfilled CPU and NAND flash chips
Pack Quantity16 blades per pack, handle not included

Common Repair Uses

  • Chip-off and pad-cleaning work on mobile phone motherboards.
  • Separating CPU from NAND flash after heating
  • Cutting black underfill glue around BGA chips
  • Cleaning glue from IC and CPU sites
  • Clearing edge glue along chip perimeters
  • Preparing pads before reballing
  • NAND or eMMC chip replacement on dead phone cases
  • Underfill removal during CPU repair jobs
  • Pad cleanup after a failed chip removal

Compatible Devices

  • Universal blade set, not tied to one phone model; it works on any board where you need to cut underfill or separate chips.
  • Mobile phone motherboards with underfilled CPU packages
  • Boards with NAND flash chips bonded with underfill
  • BGA CPU and IC sites with black glue
  • iPhone logic boards that need underfill clearing
  • Android phone boards from any brand with glued chips
  • Chip-edge glue zones on mobile PCBs
  • Solder pad areas coated with leftover adhesive
  • Motherboard areas that need glue cleanup before reballing

FAQ

What is the product name?
The product name is 2UUL Full Set Hand Finish Blades (without handle) 16 Blades/Pack, SEXY Mode.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is the 2UUL Hand Finish SEXY Mode blade pack, 16 blades, without handle.
What is this product used for?
This product is used for separating CPU and NAND flash chips and removing underfill glue on mobile phone PCBs.
Which devices are compatible with this product?
This product works as a universal blade set for mobile phone motherboards and is not tied to one phone model.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does this blade pack include a handle?
No. This pack contains 16 blades only, so you use your own compatible holder.
Which SEXY blade profile separates the CPU from the NAND flash chip?
Model S separates the CPU from the NAND flash chip, while Model Y cuts black underfill glue without harming the motherboard.