Wylie Aviation Thermal Pads 5Pcs Heat Insulation Pad
₨ 850
Heat Insulation Pads for IC Rework
Wylie aviation thermal pads for mobile repair protect the parts around your rework area from hot air. Each pack contains five 5 x 5 cm pads rated for up to 600°C. Place a pad over neighbouring components, or over a display panel during screen IC transplant, then work on the target IC without exposing the rest of the board to stray heat. Use them for IC change karna jobs on phone motherboards, display problem repairs, and general PCB soldering. They sit alongside your hot air station, preheater, and PCB holder as a low-cost protection layer on every bench.
In stock
Wylie Aviation Thermal Pads for Mobile Repair: A Heat Barrier for Hot Air Rework
Wylie aviation thermal pads for mobile repair give you a compact insulation layer between your hot air flow and the parts you need to protect. Each pack holds five 5 x 5 cm pads with a rated maximum temperature resistance of 600°C. The name says “thermal pad,” but these pads shield a board during rework. They do not replace the thermal pads that sit between a chip and its heatsink inside a device. Buy them for protection at the bench, not for cooling.
Where the Pad Fits in Your Rework Workflow
Hot air spreads sideways. When you lift or reseat an IC on a phone motherboard, the capacitors, connectors, and plastic parts next to it absorb stray heat. Slide a Wylie pad over those neighbours and only the target IC area stays exposed to the airflow. Fix the board in a PCB holder, set your hot air station to the temperature the job needs, and position each pad against the IC edge under your microscope. Repeat the same placement on every board and your results stay consistent. A pack of five covers several jobs, or several sides of one dense board.
Screen IC Transplant and Motherboard Soldering
Sellers list these pads for protecting a display during screen IC transplant, where you move the driver IC from a damaged panel to a good one. The pad separates the heat zone from the panel surface, which matters when a display problem forces you to work close to sensitive layers. The same pads also protect boards during motherboard soldering, chip swaps, and component replacement on mobile phones, tablets, and laptops. If you run a repair shop that handles hardware fault boards all day, keep a spare pack next to your soldering station and reballing kit so no job starts without protection.
Technical Highlights for Buyers
You get a verified 600°C maximum temperature resistance, a 5 x 5 cm footprint, and five pads per pack. Stay within the pad’s rated limit and within the safe temperature of the board you work on. Hot air that exceeds either limit can still damage the repair. Technicians who also use multimeters for board-level diagnosis can drop these pads into the same workflow, since the pads handle protection and the meter handles testing. For Pakistani repair shops, the small pack size keeps stock simple and cost per job low.
| Weight | 0.5 kg |
|---|
Key Features
- ✓Pack of 5 pads for repeated rework jobs
- ✓5 x 5 cm size for IC-level coverage
- ✓600°C maximum temperature resistance
- ✓Designed for hot air rework protection
- ✓Suited to screen IC transplant on iPhone panels
- ✓Works on phone, tablet, and laptop boards
- ✓Pairs with hot air stations, preheaters, and PCB holders
- ✓Lightweight accessory that fits any workshop bench
Specifications
| Brand | WYLIE |
|---|---|
| Model | Aviation Heat Insulation Pad (5 pcs per pack) |
| Category | Soldering Accessories |
| Compatibility | Mobile phone, tablet, and laptop motherboard rework; phone display IC transplant |
| Technology | Heat insulation, 600°C maximum temperature resistance |
| Dimensions | 5 x 5 cm |
Common Repair Uses
- ✓Real workshop scenarios where technicians use heat insulation pads.
- ✓IC swap on phone motherboards
- ✓Screen IC transplant on display panels
- ✓Chip swap on displays
- ✓Component replacement near sensitive parts
- ✓Motherboard soldering with hot air
- ✓LCD repair involving IC work
- ✓PCB repair on dense boards
- ✓Protecting neighbouring components during rework
Compatible Devices
- ✓General tool scope for hot air rework protection. It is not device-specific.
- ✓iPhone display panels (screen IC transplant)
- ✓iPhone motherboards
- ✓Android phone motherboards
- ✓Tablet motherboards
- ✓Laptop motherboards
- ✓Other electronic boards under hot air soldering
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Are Wylie aviation thermal pads the same as CPU thermal pads?
What is the maximum temperature the Wylie aviation thermal pad can handle?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



