Relife TF2 Plus Insulated Glass Motherboard Fixture

Original price was: ₨ 5,200.Current price is: ₨ 4,500.

Relife TF2 Plus Glass Fixture

The Relife TF2 Plus glass fixture holds a phone, iPad or tablet motherboard on a heat-insulating tempered glass plate while you solder, rework or troubleshoot. The glass plate tolerates temperatures up to 500°C without warping, so repeated hot air passes do not distort your work surface. An inward bevel design grips the board edges, and a glide rail lets you slide the clamp into position without obstruction. At 153 x 90 x 23 mm, it fits compactly on a bench beside your hot air station and microscope. Mechanicpk supplies the Relife TF2 Plus to Pakistani repair shops that want a stable, thermally isolated board holder.

In stock

15 People watching this product now!
Description

Relife TF2 Plus Glass Fixture for Mobile Motherboard Rework

The Relife TF2 Plus glass fixture is a thermal and insulating board holder built for mobile phone motherboard troubleshooting and chip-level repair. Relife designed it around a tempered glass plate, which separates the board from your bench and from the heat you apply during rework. If you run a repair bench in Pakistan and handle dead phone boards, charging IC replacements or CPU glue removal every day, a fixture like this keeps the PCB steady while both hands stay free for the hot air gun and tweezers.

Insulated Tempered Glass Plate

The working surface is a high-temperature tempered glass plate rated to withstand up to 500°C without warping. Glass conducts heat far more slowly than a metal surface, so the board holds its temperature at the rework zone instead of bleeding heat into the fixture. You get a more predictable profile when you lift a BGA chip, and you reduce the risk of overheating neighbouring components. The plate also resists cracking under long, repeated heating cycles, which suits workshops that rework boards for hours at a stretch.

Bevel Grip and Glide Rail Movement

Relife gave the TF2 Plus an inward bevel clamping design. The bevel grips the board edge firmly and helps keep heat in the board during repair. A glide rail moves the clamp smoothly along the fixture, so you position a board precisely without fighting the mechanism. You set the board, slide the clamp, and start work. That matters when you swap between different board sizes through the day, because you spend seconds on setup instead of minutes.

Where It Fits in Your Repair Workflow

Place the fixture in front of your microscope and hot air station. Clamp the motherboard, apply flux, and heat the target IC or chip while the glass plate isolates the board from the bench. The same setup supports soldering, chip replacement, glue removal around chips and general board-level diagnostics. Pair it with a hot air station, soldering station, reballing kit and PCB holders from the Mechanicpk catalogue to build a complete board repair station. Technicians who currently use a basic clamp or hold boards by hand will notice the difference in stability as soon as they start reworking a hardware fault board.

Technical Notes for Buyers

The Relife TF2 Plus measures 153 x 90 x 23 mm, so it takes little bench space. Relife positions it for mobile phone, iPad and tablet motherboards, and the manufacturer describes it as suited to a wide range of chip types. Check your board dimensions against the clamp range before you rely on it for oversized boards. If you need a multi-axis rotating holder instead, browse the RL-601 series fixtures alongside it.

Additional information
Weight0.4 kg
Q & A
Please login to post questions

Key Features

  • Tempered glass plate withstands up to 500°C without warping
  • Heat-insulating surface keeps heat in the board during rework
  • Inward bevel design grips the board edge firmly
  • Glide rail clamp movement for precise board positioning
  • Built for mobile phone, iPad and tablet motherboard repair
  • Compact 153 x 90 x 23 mm body fits crowded repair benches
  • Suits soldering, chip replacement and troubleshooting
  • Supports workshop use with hot air stations and microscopes

Specifications

BrandRelife
ModelTF2 Plus (RL-TF2 Plus)
CategoryMotherboard Fixture / PCB Holder
CompatibilityMobile phone, iPad and tablet motherboards
TechnologyHeat-insulating tempered glass plate, rated up to 500°C
Dimensions153 x 90 x 23 mm

Common Repair Uses

  • Board-level repair and chip rework on mobile motherboards
  • Motherboard soldering and rework
  • IC and BGA chip removal and replacement
  • Chip glue removal around CPU and memory areas
  • Hot air station rework with heat isolated from the bench
  • Hardware fault diagnosis on dead phone boards
  • Board cleaning and flux work under the microscope

Compatible Devices

  • Universal — not device-specific; fits mobile, iPad and tablet motherboards within the fixture’s clamping range
  • Android smartphone motherboards
  • iPhone motherboards
  • iPad logic boards
  • Android tablet motherboards
  • Boards of other mobile devices within the clamp range
  • Bare PCBs removed from the device frame

FAQ

What is the product name?
The product name is Relife TF2 Plus Motherboard Glass Fixture.
What is the brand of this product?
The brand of this product is Relife.
What is the model of this product?
The model of this product is TF2 Plus (RL-TF2 Plus).
What is this product used for?
This product is used for holding mobile phone, iPad and tablet motherboards on a heat-insulating glass plate during soldering, chip rework and troubleshooting.
Which devices are compatible with this product?
This product is compatible with mobile phone, iPad and tablet motherboards that fit within its clamping range.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What temperature can the glass plate of the Relife TF2 Plus handle?
The tempered glass plate withstands temperatures up to 500°C without warping.
How does the Relife TF2 Plus hold the board during hot air rework?
An inward bevel design grips the board edges to prevent heat loss, and a glide rail lets you slide the clamp into position for a firm hold.