Mechanic 900M-T-TIS Lead-free Solder Tip
₨ 1
Fine Conical Tip for 900M-T Stations
The Mechanic 900M-T-TIS lead-free solder tip fits 900M-T series irons and 936-style soldering stations. Its sharp, bent conical point lets you reach small SMD pads, jumper wires and crowded board areas without touching neighbouring components. A lead-free alloy coating over the plated body resists corrosion and wear, so the tip holds up under the higher temperatures of lead-free solder. Keep one on your repair bench for IC change karna jobs, charging port pad cleanup, jumper lagana and general hardware fault repair on Android and iPhone boards. Pair it with your existing 900M-T station and skip the cost of a new iron.
Out of stock
900M-T-TIS Lead-Free Solder Tip for Precision Board Repair
The Mechanic 900M-T-TIS lead-free solder tip gives your 936-style station a sharp, bent conical point built for fine pad work. If you run a 900M-T series iron on your repair bench, this tip slides into the standard sleeve and lets you work on small SMD pads, jumper wires and tight board areas without bridging neighbouring joints. Mechanic applies a lead-free alloy coating over a plated body, so the tip handles the higher working temperatures that lead-free solder demands and resists corrosion from flux and daily use.
Tip Geometry and Plating
The TIS profile belongs to the fine conical family of the 900M-T range. The bent, ultra-sharp point concentrates heat on a small contact area, which suits 0402 and 0603 component pads, small connector legs and thin jumper wires. A sharp tip also gives you better visibility under a microscope, because the angled shank keeps the iron body out of your line of sight. The plated surface helps solder wet the tip evenly, and the lead-free alloy layer slows oxidation and pitting. Tip life still depends on your habits: keep the working temperature moderate, tin the tip after every session and clean it on a brass wool or damp sponge pad.
Where It Fits in Your Repair Workflow
You use this tip at the finishing end of board-level work. After you lift an IC with a hot air station, the TIS point cleans the leftover solder from tiny pads and flattens them for reballing. During charging issue repairs, you rebuild lifted USB port pads and run jumper wires to broken tracks. On display problem and backlight faults, you re-solder small filter components and connector contacts. For a dead phone that needs a continuity fix, the fine point lets you jumper a broken line without disturbing nearby parts. Technicians in Pakistan also use it to remove solder bridges on connector pins and to tidy joints before they inspect them under a microscope.
Fitting, Compatibility and Care
The 900M-T series sleeve standard covers the 936, 937, 938, 969, 8586 and 852D station families, along with many Hakko 936-style clones. Confirm that your iron takes a 900M-T tip before you order, because other series use different sleeve sizes. Insert the tip fully, heat the iron to a working temperature suited to your solder alloy, and tin the point right away. Remove the tip from the iron after long sessions so it does not seize in the sleeve. Store it dry, and replace it once the plating wears through, since a worn tip transfers heat poorly and tends to blacken. Add it to your Soldering Stations kit next to a Hot Air Station, Microscope, PCB Holder and Multimeter, and your daily workshop jobs run faster and cleaner.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Sharp, bent conical TIS profile for fine pad work
- ✓Fits 900M-T series irons and 936-style stations
- ✓Lead-free alloy coating for lead-free solder work
- ✓Plated body resists corrosion and wear
- ✓Precise heat delivery to small SMD pads
- ✓Angled shank keeps your view clear under a microscope
- ✓Compatible with common 936, 937, 938, 969, 8586 and 852D stations
- ✓Universal across Android and iPhone board repair
Specifications
| Brand | Mechanic |
|---|---|
| Model | 900M-T-TIS |
| Category | Soldering Iron Tips |
| Compatibility | 900M-T series soldering irons and 936-style stations |
| Technology | Lead-free alloy coating |
| Material | Plated copper tip body |
Common Repair Uses
- ✓Fine-pitch soldering on mobile phone logic boards and sub-boards
- ✓SMD pad cleaning after IC removal
- ✓Charging port pad rebuilding
- ✓Jumper wire soldering on broken tracks
- ✓Solder bridge removal on connector pins
- ✓Small component re-soldering for display problem faults
- ✓Pre-reballing pad preparation
- ✓Backlight and filter component repair
- ✓Dead phone continuity fixes
Compatible Devices
- ✓Universal repair tool — fits 900M-T series irons and stations, not tied to specific phone models
- ✓900M-T series soldering irons
- ✓936 series soldering stations
- ✓937 series soldering stations
- ✓938 series soldering stations
- ✓969 series soldering stations
- ✓8586 soldering stations
- ✓852D soldering stations
- ✓Hakko 936-style irons with a 900M-T sleeve
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which soldering stations fit the 900M-T-TIS tip?
Can I use the 900M-T-TIS tip with lead-free solder on mobile boards?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



