Relife LS5 SE Heating And Holder Pressing Tool
Relife LS5 SE Heating & Holder Pressing Tool Original price was: ₨ 14,000.Current price is: ₨ 10,500.
Back to products

Mechanic 800 Water For PcB Cleaning | 800g

₨ 950

Lead-Free PCB Cleaning Water for Mobile Repair

Mechanic 800 Water For PcB Cleaning gives your repair bench a lead-free, low-conductivity cleaning liquid built for mobile phone motherboards. As a PCB cleaning water for mobile repair, it lifts flux residue, oil and dirt from ICs, connectors and charging port areas, then evaporates quickly so the board dries fast. The 800 g bottle suits daily workshop use after reballing, IC replacement and water damage cleanup. Technicians in Pakistan use it to prepare boards for microscope inspection and to restore clean contact surfaces before reassembly. Order the MECHANIC 800 from Mechanicpk for consistent board-level cleaning.

In stock

15 People watching this product now!
Description

Mechanic 800 Water For PcB Cleaning: Technical Overview for Board-Level Repair

Mechanic 800 Water For PcB Cleaning is a lead-free liquid cleaner from MECHANIC, supplied in an 800 g bottle for workshops that clean circuit boards every day. As a PCB cleaning water for mobile repair, it targets the residue that builds up during board-level work. That includes flux left after reballing, oil and dirt around connectors, and deposits that remain after liquid damage. Distributor listings describe it as a low-conductivity, fast-evaporating, environmentally friendly liquid that doubles as a contact cleaner. This page explains what those properties mean at your repair bench and where the product fits in a professional workflow.

Key Technical Highlights

Low conductivity leads the verified feature list, and it matters on electronics. A cleaning liquid that conducts little electricity gives you a safer margin while the board dries between pads and ICs. Fast evaporation shortens the wait before inspection or reassembly, so a cleaned motherboard returns to your workflow quickly. The lead-free, environmentally friendly formulation suits shops that handle cleaning chemicals every day. Chemical stability keeps the liquid consistent in the bottle over time. The contact-cleaner action extends coverage beyond bare boards to sockets, connectors and charging port areas. MECHANIC sells this grade under model number 800, so you can reorder the identical product each time.

Where PCB Cleaning Water for Mobile Repair Fits in Your Workflow

Cleaning sits at two points in a typical PCB repair process: before diagnosis and after rework. A dead phone that arrives with liquid damage needs its surface contamination cleared first. Once the board is clean, you can read component markings, trace damage and check connector pins under your microscope without residue hiding the real hardware fault. After IC replacement or BGA work with your hot air station and soldering station, flux residue stays on the pads and around the chip. You remove it with this liquid, then inspect the joints before you refit shields. Reballing kits, PCB holders and multimeters belong in the same sequence. You clean, hold the board steady, measure and confirm the repair. A charging issue often traces back to a dirty port area, and a display problem can come from contaminated connector contacts, so the same bottle covers both checks. Cleaning does not repair corroded traces. It clears the surface so you can see what needs repair.

Why Technicians Choose This Liquid

A repair shop needs a cleaner that behaves the same on every job. The MECHANIC 800 gives you a stable, low-conductivity liquid with quick evaporation, so each board follows the same cleaning routine from one bench to the next. The 800 g bottle gives a service center enough volume for steady daily use, and a shop that works through dozens of motherboards a week can stock extra bottles instead of mixing alternative cleaners. The same liquid applies across mobile phones, computers and TV boards, which reduces the number of consumables on your shelf. Pair it with your own soft brush or swab, keep it near your test box and multimeter, and treat cleaning as a fixed step in every board-level repair.

Additional information
Weight0.800 kg
Q & A
Please login to post questions

Key Features

  • Lead-free liquid formulation
  • Environmentally friendly cleaning liquid
  • Low conductivity
  • Evaporates quickly after application
  • Works as a contact cleaner for connectors and sockets
  • Stable chemical properties
  • 800 g bottle for daily workshop volume
  • Suits mobile phone, computer and TV board cleaning

Specifications

BrandMECHANIC
Model800
CategoryPCB Cleaning Liquid
CompatibilityUniversal — not device-specific
Supported DevicesMobile phone, computer and TV circuit boards
TechnologyLead-free, low-conductivity cleaning liquid
MaterialLiquid
Weight800 g (net content)

Common Repair Uses

  • Real workshop scenarios where this product applies
  • Removing flux residue after reballing
  • Cleaning pads and joints after IC replacement
  • Cleaning liquid-damaged motherboards before diagnosis
  • Cleaning charging port areas on boards with a charging issue
  • Cleaning connector contacts on boards with a display problem
  • Preparing boards for inspection under a microscope
  • General motherboard cleaning during routine service
  • Cleaning TV and computer circuit boards

Compatible Devices

  • Universal cleaning liquid for circuit boards, not limited to specific models
  • Android phone motherboards from Samsung, Oppo, Vivo, Infinix, Tecno, Xiaomi and other brands
  • iPhone logic boards
  • Laptop and desktop computer motherboards
  • TV mainboards and electronic panels
  • Charging port and signal port areas
  • IC chips and surrounding pad areas
  • Connectors and sockets, including battery and FPC connectors
  • General PCB and electronic circuit boards

FAQ

What is the product name?
The product name is Mechanic 800 Water For PcB Cleaning.
What is the brand of this product?
The brand of this product is MECHANIC.
What is the model of this product?
The model of this product is 800.
What is this product used for?
This product cleans flux residue, oil and dirt from mobile phone motherboards, connectors, ICs and other circuit boards.
Which devices are compatible with this product?
This product is a universal cleaning liquid for mobile phone, computer and TV circuit boards. It is not device-specific.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does Mechanic 800 remove flux residue after reballing or IC replacement?
Yes. The liquid cleans flux residue from boards, and it evaporates quickly so you can inspect the joints soon after cleaning.
Can Mechanic 800 clean a liquid-damaged motherboard?
Yes. Suppliers sell it for cleaning liquid-damaged mobile motherboards, and it has low conductivity and evaporates quickly. Cleaning removes surface contamination only. It does not repair corroded traces or damaged components.