2UUL SC27 Firm Foam Upgraded Version 7x7x7mm 500Pcs

₨ 550

7x7x7mm Firm Foam for Mobile Repair Cleaning

The 2UUL SC27 Firm Foam Upgraded Version gives your repair bench 500 pre-cut, high-density foam cubes, each measuring 7x7x7mm, in a single bag. Each cube cleans motherboard surfaces, chip areas, camera modules, phone bezels, and solder pads without leaving residue behind. The firm structure holds its shape under pressure, so you work tight board areas with control instead of fighting a collapsing sponge. Mechanicpk supplies this 2UUL consumable to Pakistani repair shops, service centers, and technicians who clean boards daily before reballing, IC replacement, and frame reassembly. Stock your bench once and keep every cleaning job moving.

In stock

15 People watching this product now!
Description

2UUL SC27 Firm Foam: Pre-Cut Cleaning Cubes for Your Repair Bench

The 2UUL SC27 firm foam arrives as a bag of 500 high-density cubes, each cut to 7x7x7mm, made for the cleaning steps that surround every board-level repair. You clean a surface before a soldering iron, a hot air station, or a microscope inspection ever touches it, and a cube that sheds fibres or crumbles defeats that purpose. 2UUL builds this upgraded version as a ready-to-use, no-residue foam, so you pull a cube from the bag and start cleaning with no cutting or trimming. Mechanicpk stocks it for repair shops across Pakistan that burn through cleaning consumables every week.

Cube Size and Firm Foam Structure

Each cube measures 7x7x7mm. That size reaches beside shield cans, connector blocks, and camera brackets, and it still gives your tweezers enough body to grip without crushing the foam. High-density material resists compression, so the cube keeps its edges while you press it against a pad or a chip surface. Soft sponge collapses under that pressure and smears whatever it picked up across the board, which forces you to repeat the job. A firm cube lets you apply steady contact in one direction and lift contamination off the surface instead of spreading it. 2UUL specifies the foam as residue-free, which spares you a second cleaning pass to remove foam particles from a freshly cleaned board. The 500-piece bag also means you stop counting cubes during a busy shift, a real advantage when one bench handles a dead phone board, a charging issue repair, and a display problem job in the same afternoon.

Where This Foam Fits in Your Repair Workflow

Cleaning opens and closes almost every board job. Before IC replacement or CPU reballing, you clean the solder pads and the area around the chip so the stencil sits flat and fresh solder balls wet the pad properly. After rework, you clean the board again and remove dust and loose debris before you test with a multimeter or power it on a supply. Camera and frame work uses the same cube: you wipe the camera area clean of dust and fingerprints, and you clean bezel and middle-frame edges before you reassemble a screen or back cover. During hardware fault diagnosis, a clean board under the microscope exposes oxidized pads, corrosion, and cracked joints that dirt would otherwise hide. The foam supports the bigger tools on your bench, including soldering stations, hot air stations, reballing kits, PCB holders, and microscopes. It also carries over to laptop and PC board cleaning, where the same pad and chip steps apply, so a shop that repairs both phones and computers covers everything with one consumable.

Firm Foam for Motherboard Cleaning: Why a 500-Piece Bag Makes Sense

Shop owners and service centers judge consumables by cost per job and consistency between technicians. A 500-piece bag from a brand known for repair consumables gives every bench the same cube size and the same firmness, so cleaning quality stops depending on who cuts foam that day. Technicians who handle charging issue and network issue repairs spend much of their time on board preparation, and a bulk pack keeps clean cubes within reach for each of those jobs. Training institutes benefit too, because students practice pad cleaning and chip cleaning with identical material, and instructors compare results fairly across a class. You buy it once for the whole bench, store it in its bag, and refill your working tray as you need it. Pair it with the cleaning agent your shop already trusts and with the Test Boxes, Multimeters, and Soldering Stations you use for testing and rework, and your cleaning step stays quick and repeatable from the first board of the day to the last.

Additional information
Weight0.35 kg
Q & A
Please login to post questions

Key Features

  • 500 pre-cut cubes in one bag
  • 7x7x7mm cube size for tight board areas
  • High-density firm foam that keeps its shape under pressure
  • Upgraded version built for no-residue cleaning
  • Ready to use, no cutting required
  • Cleans chips, cameras, bezels, motherboards, and solder pads
  • Works on phone boards and on laptop and PC boards
  • Bulk pack suits busy repair benches and training institutes

Specifications

Brand2UUL
ModelSC27
CategorySoldering Consumables
CompatibilityUniversal, not device-specific
MaterialHigh-density firm foam
Dimensions7 x 7 x 7 mm per cube
Quantity500 pieces per bag

Common Repair Uses

  • Cleaning steps before, during, and after board-level phone repair
  • Motherboard cleaning
  • Chip surface cleaning before and after IC replacement
  • Camera cleaning
  • Phone bezel and frame cleaning
  • PCB pad oxidation cleaning
  • Solder pad cleaning before reballing
  • Dust and debris removal from tight board areas
  • Laptop and PC board cleaning

Compatible Devices

  • Universal cleaning foam, not device-specific; suits any phone, PCB, or frame surface you clean
  • Smartphone motherboards (any brand)
  • Phone camera modules and camera areas
  • Phone bezels and middle frames
  • Mobile chip and IC surfaces
  • Oxidized PCB pads
  • Solder pads after rework
  • Laptop and PC boards
  • Digital product frames

FAQ

What is the product name?
The product name is 2UUL SC27 Firm Foam Upgraded Version.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is SC27.
What is this product used for?
This product is used for cleaning motherboards, chips, camera areas, phone bezel frames, and solder pads during mobile phone repair.
Which devices are compatible with this product?
This product is universal and not device-specific. It works on any phone motherboard, frame, or PCB surface you need to clean.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What size are the foam cubes and how many come in one bag?
Each cube measures 7x7x7mm, and one bag holds 500 pieces.
Can I use this foam to clean solder pads and oxidized PCB pads on a phone motherboard?
Yes. 2UUL lists this foam for chip cleaning, camera cleaning, phone bezel frame cleaning, motherboard cleaning, and PCB pad oxidation cleaning, and the high-density material leaves no residue.