YCS Silicone Reapir Mat Grey S-550A Big
₨ 4,200
Silicone Repair Mat for Mobile Repair
The YCS Silicone Reapir Mat Grey S-550A Big is a grey silicone high-temperature insulation pad that protects your bench during soldering, hot air rework and board-level repair. This silicone repair mat for mobile repair gives you a large, flat staging area for phone boards, screws and flex cables, and it wipes clean after flux and solder residue. Mobile repair technicians, repair shops and service centers in Pakistan use a mat like this under PCB holders, soldering stations and microscopes to keep every job organized. Order the YCS S-550A from Mechanicpk and set up a safer, tidier bench for IC change, charging port and reballing work.
In stock
Silicone Repair Mat for Mobile Repair: YCS S-550A Big Grey Bench Surface
Every board-level repair starts with the surface under the phone. The YCS Silicone Reapir Mat Grey S-550A Big gives your bench a high-temperature silicone insulation layer. A silicone repair mat for mobile repair protects the table instead of letting the table absorb the damage. In a Pakistani repair shop, one bench handles dead phone boards, charging port jobs and IC change work all day. Each job drops heat, flux and stray solder onto whatever lies below the board. A silicone mat takes that wear so your bench top does not.
Heat Insulation for Soldering and Rework
YCS lists the S-550A as a high-temperature insulation pad, and silicone is the right material for that role. You place the board on the mat, run your soldering iron or hot air gun, and the surface keeps bench heat away from the table underneath. Flux, solder splatter and glue wipe off silicone without soaking in, so you clean the mat between jobs and start the next board on a fresh surface. The grey finish suits a busy workshop because it hides flux marks, while small screws, flex connectors and tweezers stay easy to spot against it. The Big size gives you room to lay out a full phone teardown, a second board and your hand tools on one surface instead of stacking parts at the edge of the bench. That space matters when one technician clears ten phones before lunch.
Workflow Fit: From Teardown to Reflow
Treat the mat as the staging area for the whole repair. Strip the phone, line the screws up in the order they come out, and park the display and flex cables to one side. Move the bare board to the centre of the mat for rework. Fix the board in your PCB holder, bring the microscope in for inspection before and after each reflow, and keep your hot air station and soldering station within reach. When you finish a reballing job with your reballing kit, the mat catches loose solder balls so they do not roll under the bench or into the next board. Technicians who run Box chalana and software marna sessions on the same table also get a clean, insulated spot to rest the phone while the cable stays connected. A dead phone that needs a jumper lagana fix and an IC change in the same hour moves through your bench without anyone clearing space first.
Pairing the S-550A With Your Existing Tool Set
The mat supports your tools rather than replacing them. Pair it with soldering stations and hot air stations for IC change and CPU rework, with multimeters for short-circuit checks on charging issue boards, and with ISP pinout tools, eMMC programmers and UFS adapters when a hang on logo phone needs board-level flashing. Test boxes and programmers sit safely on the mat during a session, away from the solder splashes that ruin a bare tabletop. Repair shop owners who equip several benches get one consistent working surface for every technician, and training institutes get a clear setup to teach on. Ask the Mechanicpk team for the exact dimensions before you order for a fixed-size bench, because the final fit depends on your table.
| Weight | 0.125 kg |
|---|
Key Features
- ✓Soldering and desoldering on phone boards
- ✓IC change with a hot air station
- ✓BGA reballing with a reballing kit
- ✓Charging port and flex connector replacement
- ✓Board cleaning and flux removal
- ✓Sorting screws and parts during teardown
- ✓Board holding during microscope inspection
- ✓Resting devices during ISP, eMMC or UFS flashing sessions
Specifications
| Brand Entity | YCS |
|---|---|
| Product Entity | YCS S-550A Big Grey Silicone Repair Mat |
| Technology Entity | High-temperature silicone insulation pad |
| Compatible Device Entities | Smartphone motherboards, iPhone logic boards, tablet boards, laptop boards |
| Repair Process Entity | Soldering, hot air rework, BGA reballing, IC change |
| Industry Entity | Mobile repair industry, PCB repair, Pakistan repair workshops |
Common Repair Uses
- ✓Universal work surface, not device-specific
- ✓Android smartphone motherboards
- ✓iPhone logic boards
- ✓Tablet and iPad boards
- ✓Laptop and MacBook boards
- ✓Smartwatch and wearable boards
- ✓Earbud and charging case boards
- ✓Power bank and charger boards
- ✓Programmers, test boxes and small repair tools
Compatible Devices
- ✓Silicone construction for bench heat insulation
- ✓Listed by YCS as a high-temperature insulation pad
- ✓Big size version for a larger working area
- ✓Grey finish that hides flux marks and keeps small parts visible
- ✓Flat staging surface for boards, screws and flex cables
- ✓Wipe-clean surface after flux and solder residue
- ✓Universal use with any soldering station or hot air station
- ✓Fits repair benches in shops, service centers and training labs
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can I use the YCS S-550A mat with a hot air station?
Does a silicone repair mat replace an ESD mat?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



