YCS 11C Titanium Alloy Blue Straight Tweezere
YCS 11C Titanium Alloy Blue Straight Tweezers Original price was: ₨ 1,600.Current price is: ₨ 1,350.
Back to products

YCS 11D Titanium Alloy Blue Curved Tweezers

Original price was: ₨ 1,600.Current price is: ₨ 1,350.

Curved Titanium Tweezers for Mobile Repair

The YCS 11D Titanium Alloy Blue Curved Tweezers give you a lightweight, non-magnetic grip for the small parts on a mobile PCB. The bent tip keeps your fingers and the tool body out of your line of sight, so you see the pad, the jumper wire or the SMD component while you place it. Titanium alloy resists corrosion and holds up through long daily use, and the blue finish makes the tweezer easy to spot on a crowded repair bench. Pair it with your hot air station, soldering iron and microscope for IC change, jumper work and board cleaning.

In stock

17 People watching this product now!
Description

Curved Titanium Tweezers for Mobile Repair Built for Board-Level Work

The YCS 11D Titanium Alloy Blue Curved Tweezers are curved titanium tweezers for mobile repair, built for the small parts you handle on every board-level job. YCS offers the 11D as the blue, curved-tip model of its titanium tweezer range, next to the natural straight 11A, natural curved 11B and blue straight 11C. You reach for it when you need a clear view of the pad while you place an SMD component, hold a jumper wire in position, or reposition a connector during a charging issue or display problem repair.

Titanium Alloy Construction That Holds Up on the Bench

Titanium alloy gives the YCS 11D a light body, so your hand stays steady through long sessions of IC change, board cleaning and component placement. The material resists corrosion, which matters on a bench where flux, isopropyl alcohol and humidity touch your tools every day, and it stays durable through heavy daily use. Titanium is also non-magnetic. The tips will not magnetize tiny steel screws or pull stray metal particles across the board, so parts stay where you put them. The blue finish separates the 11D from your silver tweezers, and you find it quickly when five or six tools lie across your repair mat. Lighter tools also cost your fingers less effort when you hold a component against heat for several seconds, so your hand stays calm when the joint needs it. Wipe the tips with isopropyl alcohol after each job to remove flux residue and keep the grip clean on small components.

Curved Tip Control During Rework and Soldering

A curved tip changes your wrist angle and your line of sight. The bend lifts the tool body and your fingers out of the view line, so you watch the pad directly, with or without a microscope. This reduction in visual obstruction gives you better control and stability during delicate operations, and it shows up in the jobs you repeat most. You slide a small IC onto its pad under a hot air station, press a jumper wire onto a broken trace while your soldering iron tacks it down, or lift a tiny capacitor from a crowded board without touching its neighbours. On a dead phone with a hardware fault, that precision decides whether you fix the board or create a second fault.

The curved profile also suits angled access. You reach under flex connectors, around shield frames and between tall components where a straight tweezer forces you to tilt the whole board. Pair the tweezer with a PCB holder, and you keep the board fixed in one position while your free hand does the fine placement.

Where the YCS 11D Fits in Your Repair Workflow

This tweezer supports the hands-on steps around your main equipment. During diagnosis, you hold components or probe points steady while your multimeter and microscope do the measuring and inspection. During eMMC and UFS repair, you position ISP jumper wires and small parts next to your ISP pinout tools, eMMC programmers, UFS adapters and test boxes, so the connection to the programmer stays clean. When a boot loop issue or a dead after flash case points to the eMMC, you reach the test points with this tweezer before you plug in the programmer, and you place the jumper without bridging the neighbouring pads. For reballing, you handle small parts and stencils beside your reballing kit, and your hot air station or soldering station supplies the heat.

If your daily work leans toward straight-line jumper placement, the blue straight-tip YCS 11C from the same range gives you a second option, and keeping a curved and a straight tweezer on the bench covers both angles. Mechanicpk supplies the YCS 11D to technicians, service centers and repair shops across Pakistan who build their bench one precise tool at a time, from hand tools through programmers and rework stations.

Additional information
Weight0.10 kg
Q & A
Please login to post questions

Key Features

  • Titanium alloy construction that stays lightweight in hand
  • Corrosion-resistant material for flux and isopropyl alcohol exposure
  • Non-magnetic body that does not magnetize small steel parts
  • Curved tip that reduces visual obstruction
  • Better control and stability during delicate operations
  • Blue finish that stands out on a busy repair mat
  • Suits SMD, jumper wire and IC rework tasks
  • Pairs with hot air stations, soldering stations, microscopes and PCB holders

Specifications

BrandYCS
ModelYCS-11D
CategoryTweezers (Hand Tools)
CompatibilityUniversal — not device-specific
TechnologyCurved-tip, non-magnetic titanium alloy construction
MaterialTitanium alloy

Common Repair Uses

  • Hands-on placement and handling steps in board-level mobile repair.
  • SMD component placement and removal
  • Holding jumper wire in position during soldering
  • IC change and rework alongside a hot air station
  • Reballing support and small-part handling
  • Positioning ISP jumper wires at test points
  • Charging port area and connector repair
  • Board cleaning and flux residue removal around small parts
  • Display connector and flex cable positioning

Compatible Devices

  • Universal hand tool, not device-specific. It works on any phone or small-electronics PCB you can reach with a tweezer tip.
  • Android smartphone motherboards
  • iPhone logic boards
  • Samsung and Oppo boards
  • Vivo and Xiaomi boards
  • Infinix, Tecno and Realme boards
  • Tablet PCBs
  • Smartwatch and small wearable boards
  • Flex cables and board-to-board connector areas

FAQ

What is the product name?
The product name is YCS 11D Titanium Alloy Blue Curved Tweezers.
What is the brand of this product?
The brand of this product is YCS.
What is the model of this product?
The model of this product is YCS-11D.
What is this product used for?
This product is used for holding and placing small components, jumper wires and SMD parts during mobile phone and PCB repair.
Which devices are compatible with this product?
This is a universal hand tool and is not device-specific, so you can use it on any mobile phone or small-electronics PCB.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Is the YCS 11D tweezer magnetic?
No. The YCS 11D uses titanium alloy, which is non-magnetic, so it does not magnetize small steel screws or attract stray metal particles on the board.
What is the difference between the YCS 11D, 11B and 11C tweezers?
The 11D and 11B both have curved tips, and the 11D has a blue finish while the 11B has a natural finish. The 11C has the same blue finish with a straight tip.