2UUL DA91 XYZ Screen Opener 3 in 1 Set
₨ 1,100
3 in 1 XYZ Screen Opening Set
The 2UUL DA91 XYZ screen opener gives you three blade profiles, X, Y and Z, in one set for opening phones, tablets and compact device cases. The X model carries a square head with a balanced lever action and a 4 mm cutting depth. The Y and Z models bring their own cutting depths and uses, so you match the blade to the seam. The manufacturer builds the set from ultra-flexible aluminum alloy and fits an anti-slip rubber grip. You separate the display from the frame in controlled steps, protect the flex cables, and reach the battery, charging port and mainboard faster on every display problem or charging issue job. Mechanicpk supplies the DA91 XYZ set to technicians across Pakistan.
Out of stock
2UUL DA91 XYZ Screen Opener: Three Blade Profiles for Controlled Display Separation
The 2UUL DA91 XYZ screen opener packs three opening blades, X, Y and Z, into one set, and each blade carries a different cutting depth and job. Every hardware fault repair, from a charging issue to a display problem, starts with a clean gap between the screen and the frame. A blade that bends, skips or cuts too deep costs you a flex cable, a digitizer or a clean frame edge. The DA91 set gives you three profiles to match the gap in front of you, so you pick the blade by the seam instead of forcing one tool through every job. Mechanicpk stocks it for technicians who open phones and tablets all day and want repeatable results at the first step of the repair.
Blade Geometry and Build
The X model uses a square head built for lifting with a balanced lever action, and it works at a cutting depth of 4 mm. The Y and Z models complete the trio with their own cutting depths and uses, so you reach tight seams with one profile and wider gaps with another. The manufacturer makes the set from ultra-flexible aluminum alloy. That flex lets the blade follow the curve of a frame without gouging the edge. The handle carries an ergonomic anti-slip rubber grip, which keeps the tool steady when your hand works close to the display edge. Because all three blades travel together in a single 3 in 1 set, you keep the full range on your bench instead of hunting for the right opener mid-job.
Where the DA91 Fits in the Repair Workflow
Screen opening is the entry point of almost every phone and tablet repair, and the DA91 sits right there. On glued displays, you soften the adhesive first with a hot air station or a heating plate. Then you slide the blade into the seam and lift in small, controlled steps. Once the screen comes up, you reach the battery connector, the charging port and the mainboard.
From there the workflow branches by fault. A dead phone or a hang on logo case that needs board-level work moves on to a PCB holder, a microscope and a soldering station, and sometimes to ISP pinout tools or an eMMC programmer. A battery or charging port job needs a multimeter check at the connector before you close the device. When the repair involves IC change karna or reballing, a clean opening protects the connectors and the board you work on next, because a damaged flex or a bent frame adds hours to the job. A careful first step also lets you reuse the original screen on a hardware fault repair that has nothing to do with the display.
Why Technicians Choose a Dedicated Blade Set
Improvised tools like worn cards, kitchen knives and bent picks scratch frames, lift paint and cut flex cables. A dedicated opening set gives every technician in your shop the same tool for the same job, which keeps the quality of your teardown consistent from bench to bench. The three-blade format also lets you work through a mixed daily queue, from compact smartphones to larger tablets, without changing your technique.
The set suits repair shops and service centers that run high screen-opening volume. If your shop separates screens all day, you can step up to a dedicated screen separator fixture later and keep the DA91 for frame work, seam lifting and final opening. The package contents are one 2UUL DA91 XYZ 3 in 1 set with the X, Y and Z models.
| Weight | 0.1 kg |
|---|
Key Features
- ✓3 in 1 set with X, Y and Z blade models
- ✓X model with square head for balanced lever lifting
- ✓4 mm cutting depth on the X model
- ✓Y and Z models with different cutting depths and uses
- ✓Ultra-flexible aluminum alloy blade material
- ✓Ergonomic anti-slip rubber grip
- ✓Suits smartphones, tablets and compact PC cases
Specifications
| Brand | 2UUL |
|---|---|
| Model | DA91 XYZ |
| Category | Screen Opening Tools / Disassembly Tools |
| Compatibility | Smartphones, tablets and compact electronic device cases |
| Material | Ultra-flexible aluminum alloy |
Common Repair Uses
- ✓Disassembly and opening tasks at the start of phone and tablet repair
- ✓Separating the screen from the frame
- ✓Opening the gap before display replacement
- ✓Lifting the display to reach the battery
- ✓Opening the device for charging port repair
- ✓Gaining board access for hardware fault diagnosis
- ✓Opening dead phones for IC-level work
- ✓Tablet teardown and re-opening
Compatible Devices
- ✓General-purpose opening tool for compact electronics — not limited to specific phone models
- ✓Android smartphones
- ✓iPhone series
- ✓Tablets
- ✓iPad series
- ✓Compact PC and laptop-type cases
- ✓Small electronic device housings
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What is the difference between the X, Y and Z blades in the DA91 set?
Is the DA91 XYZ set suitable for opening both phones and tablets?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



