2UUL SC81 SurGun Actuated Glue Gun Flux Dispenser

₨ 4,200

Rechargeable Electric Paste and Flux Dispenser

The 2UUL SC81 SurGun Actuated Glue Gun works as an electric solder paste dispenser for mobile repair, replacing thumb pressure with a controlled, battery-powered feed. A short press cycles through high, medium and low gears, so you match the flow to the material in the container. Auto pressure release stops the flow the moment you finish, which keeps paste and flux off neighbouring pads. A Type-C port with a charging indicator recharges the 1100mAh battery, and the gun suits containers with a 17.5mm inner diameter. Technicians use it for SMT solder paste, flux, soldering oil and UV adhesive on smartphone boards.

In stock

14 People watching this product now!
Description

Electric Solder Paste Dispenser for Mobile Repair Benches

Every board-level repair that involves a reflow step starts with the same task: placing a small, repeatable amount of paste or flux exactly where the joint needs it. The 2UUL SC81 SurGun Actuated Glue Gun is an electric solder paste dispenser for mobile repair that takes that task off your thumb. It runs on an internal 1100mAh battery, charges over Type-C, and feeds material from containers with a 17.5mm inner diameter. Mechanicpk stocks it for Pakistani technicians who want consistent deposits on IC change jobs, charging port repairs and reballing work, and for shop owners who want every bench in the workshop to produce the same joint quality.

Three Gears and Auto Pressure Release

Manual syringes push out material in bursts. Press too hard and a blob lands across two pads. Press too softly and you stop with half a row tinned. The SC81 replaces that guesswork with three gears: high, medium and low. A short press switches between them, and a long press powers the unit on or off. Start in low gear for thin flux or soldering oil, where you want a fine film around a BGA footprint, and move to high gear when thicker SMT paste needs a faster feed across a row of pads.

Auto pressure release handles the other half of the problem. When you finish a deposit, the gun releases pressure so material does not keep creeping out of the tip. Your pads stay clean, and you spend less time wiping excess before the hot air station comes in. Fixed gear settings also let every technician on your team repeat the same deposit, which protects joint quality on a shared bench.

Battery, Type-C Charging and One-Handed Control

Power comes from a 1100mAh battery that recharges through a Type-C port, the same cable standard already on most workshop benches. An indicator light shows charging status, and a full charge delivers up to one hour of operating time. The rated input is 5V at 0.6A, and the output runs at 5V with 0.6A to 1A. The lightweight housing suits one-handed use, so your other hand stays free to steady the board in a PCB holder or guide tweezers under the microscope. Cordless operation also removes cable drag, which matters when you place paste on fine-pitch pads and cannot afford to nudge a fixed board. Charge the unit between shifts, and it stays ready for the next batch of motherboards.

Where the SurGun Fits in Your Repair Workflow

The SurGun sits between board preparation and heat. Clean the pads, apply paste or flux with the dispenser, then bring in your hot air station or soldering station to finish the joint. That sequence repeats across IC change, CPU reballing, charging port replacement and lifted pad repair, which covers many of the hardware fault, charging issue and dead phone cases that reach a service counter. Pair the dispenser with a reballing kit when you rebuild BGA balls, a microscope to inspect the deposit, and a multimeter to confirm continuity after the joint cools.

For eMMC and ISP pad work, a controlled flux layer helps you tin the pads before you attach pinout wires. Swap in a container of UV adhesive when a repair calls for bonding instead of soldering. Technicians who handle dozens of boards a day gain the most, because manual dosing tires your hand across a long shift while an electric feed keeps the deposit size steady from the first board to the last. That consistency helps cut rework and keeps the finished board clean. When your workshop outgrows basic fluxing, browse the ISP Pinout Tools, eMMC Programmers, UFS Adapters and Test Boxes categories at Mechanicpk to extend the same workflow.

Additional information
Weight0.29 kg
Q & A
Please login to post questions

Key Features

  • Electric actuated dispensing replaces manual squeezing
  • Auto pressure release prevents overflow at the end of each deposit
  • Three gears (high, medium, low) switch with a short press
  • Type-C rechargeable design with a charging indicator light
  • Long press turns the unit on and off
  • Suits containers with a 17.5mm inner diameter
  • 1100mAh battery delivers up to one hour of operating time
  • Lightweight housing supports one-handed use

Specifications

Brand2UUL
ModelSC81
CategoryElectric Solder Paste and Flux Dispenser
CompatibilityContainers with a 17.5mm inner diameter
Supported DevicesUniversal — not device-specific
TechnologyBattery-powered electric dispensing with auto pressure release, 3 gears (high, medium, low), Type-C charging, 1100mAh battery, up to 1 hour of operating time
Input Voltage5V (0.6A)
Output Voltage5V (0.6A–1A)

Common Repair Uses

  • Material application during board-level mobile phone and PCB repair
  • Placing SMT solder paste on pads before IC placement
  • Applying flux before hot air rework on BGA and SMD components
  • Fluxing pads during CPU, eMMC and PMIC replacement
  • Adding a flux layer when reballing BGA ICs
  • Tinning pads before attaching ISP pinout wires
  • Repairing lifted pads and damaged solder joints
  • Soldering charging port and connector replacements
  • Applying UV adhesive where a repair needs bonding

Compatible Devices

  • Universal tool — not tied to a specific phone model or chipset
  • Universal tool, not tied to any phone brand or chipset
  • Containers and syringes with a 17.5mm inner diameter
  • SMT solder paste
  • Paste flux and BGA flux
  • Soldering (welding) oil
  • UV adhesive and glue
  • Android phone motherboards, any brand
  • iPhone logic boards and other smartphone PCBs

FAQ

What is the product name?
The product name is 2UUL SC81 SurGun Actuated Glue Gun.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is SC81.
What is this product used for?
This product is used for dispensing SMT solder paste, flux, soldering oil and UV adhesive electrically during mobile phone and PCB repair.
Which devices are compatible with this product?
This product is a universal tool and does not depend on a specific phone model. It works with containers that have a 17.5mm inner diameter.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What container size does the 2UUL SC81 SurGun fit?
The SC81 suits glue, paste and flux containers with a 17.5mm inner diameter. Check your syringe or tube diameter before you buy.
How long does the SC81 SurGun run, and how many speed settings does it have?
It runs up to one hour on a full charge from its 1100mAh battery, charges through a Type-C port, and offers three gears: high, medium and low.