Mechanic T7000 Black Glue 50ml for Mobile Repair

₨ 190

Mechanic T7000 Black Adhesive 50ml

Mechanic T7000 black glue for mobile repair gives you a single-component liquid adhesive in a 50ml tube. It bonds glass, plastic, acrylic, PE, PP, PVC, ABS and metal, so you can reseat touch screens, refit display frames and secure back covers without switching adhesives. The black finish keeps the glue line discreet along bezels and frame edges. You get a 3–6 minute surface-dry window for positioning, a flexible bond after cure, and a non-corrosive formula. One tube covers many display and frame jobs on a busy repair bench.

In stock

20 People watching this product now!
Description

T7000 Black Glue for Mobile Repair: Flexible Frame Bonding

Mechanic T7000 black glue for mobile repair puts a single-component liquid adhesive on your bench that bonds glass, plastic, acrylic and metal in one application. The 50ml tube suits a workshop that refits displays every day, because one tube covers many frames. The black finish hides the glue line along the bezel, so a reassembled display looks clean at the edge. You apply it straight from the tube, position the part, and let it cure.

Adhesive Properties That Matter on the Bench

Mechanic lists the T7000 formula at 48%–55% solid content with medium viscosity, which gives you a bead that stays where you place it instead of running. The cured bond stays flexible, so the frame keeps its grip when the phone flexes slightly in a pocket or takes small knocks. The adhesive resists temperatures from -30°C to +90°C, which covers the heat a phone sees on a dashboard or near a charger.

The formula is non-corrosive and single-component. You skip mixing ratios and pot-life limits, and you open the tube only when the job is ready. The material list is broad: glass, acrylic, PE, PP, PVC, ABS and metal. That range covers most touch screen frames, plastic bezels and back covers that reach a Pakistani repair shop.

Application and Cure Workflow

Start with a clean, dry surface. Wipe the frame with isopropyl alcohol to remove dust, oils and old adhesive residue, because leftover residue weakens the new bond. Lay a thin, even bead along the frame edge and keep it clear of the active display area.

The surface dries in about 3–6 minutes. Use that window to position the display or back cover, then press it into place and hold it steady. Full cure takes 24–48 hours, so leave the phone undisturbed overnight before you hand it back. Store the tube between 10°C and 28°C and close the cap firmly after each job to protect the remaining adhesive.

Where T7000 Fits in Your Repair Workflow

A display problem often ends with a lifted screen or a loose frame, not a dead board. After you separate the old display, clean the frame and fit the replacement, T7000 closes the job. It sits at the end of the screen replacement workflow, after diagnostics and component work are done.

Technicians who run board-level work with hot air stations, soldering stations and PCB holders still finish every hardware fault repair with a secure closing step. Under a microscope you can check that the bead sits evenly and stays off the display edge before you press the parts together. The same tube handles back cover refits, frame repairs and small plastic part re-attachment, so you stock one adhesive for several routine jobs.

For a shop that buys supplies in volume, the 50ml format cuts reorder frequency compared with smaller tubes. Pair it with your screen-opening tools and cleaning supplies from the Repair Accessories category to keep the whole display workflow in one order.

Additional information
Weight0.5 kg
Q & A
Please login to post questions

Key Features

  • Single-component liquid formula, no mixing needed
  • Black finish for a discreet glue line
  • 3–6 minute surface-dry positioning window
  • Flexible bond after full cure
  • Bonds glass, acrylic, PE, PP, PVC, ABS and metal
  • Resists -30°C to +90°C
  • Non-corrosive formula
  • 50ml tube for high-volume workshop use

Specifications

BrandMechanic
ModelT7000
CategoryAdhesives and Glue
CompatibilityUniversal – not device-specific
TechnologySingle-component liquid adhesive
MaterialEpoxy resin based liquid adhesive
Capacity50ml
ColourBlack
Surface Dry Time3–6 minutes
Full Cure Time24–48 hours
Temperature Resistance-30°C to +90°C

Common Repair Uses

  • Display and frame bonding, back cover refitting, and general plastic and glass bonding on the repair bench
  • Reseating a touch screen into its frame after replacement
  • Refitting a loose display bezel
  • Securing a back cover or back glass
  • Re-attaching lifted plastic frame edges
  • Closing up a display after screen separation
  • Fixing small plastic and acrylic components
  • Bonding glass to plastic or metal frames
  • General workshop bonding for small electronic parts

Compatible Devices

  • Universal adhesive – bonds the listed materials, not limited to specific phone models
  • Smartphone touch screen and display frames
  • Tablet display frames
  • Phone back covers
  • Glass panels and glass back covers
  • Acrylic components
  • ABS and PVC plastic parts
  • PE and PP plastic parts
  • Metal frames and small metal parts

FAQ

What is the product name?
The product name is Mechanic T7000 Glue (50ml) Black.
What is the brand of this product?
The brand of this product is Mechanic.
What is the model of this product?
The model of this product is T7000.
What is this product used for?
This product is used for bonding touch screens, display frames, back covers and other glass, plastic and metal parts during mobile repair.
Which devices are compatible with this product?
This product is a universal adhesive and is not limited to specific devices. It bonds glass, acrylic, PE, PP, PVC, ABS and metal parts.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
How long does Mechanic T7000 glue take to dry and fully cure?
The surface dries in about 3–6 minutes, which gives you time to position the part. Full cure takes 24–48 hours, so leave the phone undisturbed until then.
Which materials can T7000 black glue bond on a phone?
T7000 bonds glass, acrylic, PE, PP, PVC, ABS and metal, which covers most screen frames, bezels and back covers.