Haina Max H-7009 Electric Grinder Tool

₨ 7,800

Haina Max H-7009 Electric Grinder Tool for Mobile Repair

The Haina Max H-7009 is a professional, high-precision, multi-function electric grinder tool built for the mobile repair bench. It handles grinding, polishing, and engraving, so you clear residue, smooth frame edges, and restore contact surfaces with one handpiece. Electric drive keeps pressure even across PCB edges, metal mid-frames, and oxidized contacts. Repair shops and GSM technicians use it between fault tracing and rework, where clean surface preparation decides whether a repair holds. Pair it with a microscope, a hot air station, and a PCB holder for a complete preparation setup.

Out of stock

13 People watching this product now!
Description

Haina Max H-7009: Electric Grinder Tool for Mobile Repair Benches

The Haina Max H-7009 is an electric grinder tool for mobile repair benches where hand files and loose abrasives stop giving you control. Haina Max positions this model as a professional, high-precision, multi-function grinder, so a single handpiece covers grinding, polishing, and engraving work. Electric drive replaces wrist effort, which keeps pressure steady across a board edge, a mid-frame, or a corroded contact. You move from material removal to surface finishing without changing equipment. For a repair shop that handles dead phone cases, liquid damage cleanup, and frame correction, that consistency saves time on every job.

Where the Grinder Fits in Your Repair Workflow

Most grinding work sits between diagnosis and reassembly. After you trace a hardware fault, you often need to clear residue, trim a damaged edge, or expose a clean metal surface before soldering or rework. The H-7009 handles that stage. You guide the abrasive head over the target area and finish the preparation before you pick up the hot air station or soldering iron. This placement matters on the PCB repair bench, because surface quality decides whether a jumper lagana job or an IC change karna job holds. Many charging issue and hang on logo repairs after water exposure start with cleaning corroded contacts and shield edges. Use the tool under a microscope for board-level work, and keep a multimeter nearby to confirm continuity after you clean a trace or contact.

Grinding, Polishing, and Engraving Across PCB, Frame, and Contact Work

Grinding removes unwanted material, polishing restores a clean surface, and engraving marks parts for identification. The H-7009 covers all three, so you avoid keeping a separate tool for each task. On a liquid-damaged phone, you can clear oxidation from contacts before you test the board. On a bent or cracked frame, you can shape and smooth the edge so the board and display seat correctly. On a PCB with leftover epoxy or adhesive around the work area, you remove it in controlled passes instead of scraping with a blade. This makes the H-7009 a practical PCB grinding tool for technicians who need repeatable results. Apply light pressure, work in short passes, and check progress under magnification. Excess pressure and heat damage boards faster than any tool setting, so patience protects the repair.

Choosing Bits and Building the Bench Setup

Abrasive heads decide the finish, so match each bit to the material. Coarse heads remove frame and housing material quickly. Fine heads suit board surfaces and contacts, where deep scratches cause new faults. Keep a few shapes on hand: a cylinder for flat edges, a cone for corners, and a small ball for tight spots. Confirm that a bit’s shank size fits the tool’s collet before you buy accessories, and keep dust out of the handpiece so the bit runs true. Wear eye protection, because ground epoxy and metal particles travel. Place a damp cloth beside the work area to keep dust off open boards. If you want a complete preparation station, add a hot air station, a soldering station, a PCB holder, and a reballing kit. Together they cover the full path from surface preparation to rework, and this grinder is the first tool in that sequence. It also suits mobile repair training institutes, where students learn controlled material removal before they move to chip-level work.

Additional information
Weight3.5 kg
Q & A
Please login to post questions

Key Features

  • Professional, high-precision build
  • Multi-function: grinding, polishing, and engraving
  • Electric drive for even, low-effort pressure
  • Suits PCB, frame, and contact surface preparation
  • One handpiece replaces separate manual tools
  • Works with interchangeable abrasive heads
  • Fits mobile repair benches, shops, and training institutes
  • Pairs with microscopes, hot air stations, and soldering stations

Specifications

BrandHaina Max
ModelH-7009
CategoryElectric Grinder / Polishing Tool
CompatibilityUniversal, not device-specific

Common Repair Uses

  • Surface preparation and finishing tasks on repair benches.
  • Cleaning oxidation from contacts after liquid damage
  • Removing excess epoxy or adhesive around a PCB work area
  • Smoothing cracked or bent frame edges
  • Deburring cut edges on boards and brackets
  • Polishing scratched metal parts
  • Preparing a clean surface before soldering or jumper work
  • Engraving identification marks on parts
  • Trimming material for fit during frame correction

Compatible Devices

  • Universal scope. The tool works on the material you are repairing, so it is not tied to specific phone models.
  • Android smartphone motherboards (all brands)
  • iPhone logic boards
  • Metal and plastic phone mid-frames
  • Tablet mainboards
  • Laptop board edges and connectors
  • Shield cans and metal brackets
  • Charging port and battery connector contact areas
  • Epoxy or adhesive-covered PCB sections

FAQ

What is the product name?
The product name is Haina Max H-7009 Electric Grinder Tool.
What is the brand of this product?
The brand of this product is Haina Max.
What is the model of this product?
The model of this product is H-7009.
What is this product used for?
This product is used for grinding, polishing, and engraving on mobile repair and PCB work.
Which devices are compatible with this product?
This product is universal and not tied to specific devices. It works on phone boards, frames, and contacts.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can I use the Haina Max H-7009 to clean corroded contacts on a liquid-damaged phone board?
Yes. Grinding and polishing heads remove oxidation from contacts and shield edges. Use a fine abrasive head, light pressure, and magnification, then check continuity with a multimeter.
Is the Haina Max H-7009 suitable for removing epoxy or glue near ICs on a dead phone motherboard?
It suits removing excess epoxy and adhesive from board areas in controlled passes. Work under a microscope with a fine head, and stay clear of components and traces.